ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Group Buys (https://www.scoobynet.com/group-buys-356/)
-   -   *** 2003-2005 Blobeye reverse bonnet vents *** (https://www.scoobynet.com/group-buys-356/873158-2003-2005-blobeye-reverse-bonnet-vents.html)

Neil.. 13 February 2011 07:19 PM

*** 2003-2005 Blobeye reverse bonnet vents ***
 
I have managed to get a local company to take a mould off the bonnet vent I used on my car for the last couple of years, and produce them for me.

I have had to have 10 made initially which has dictated the cost of these.

I can supply them in bare GRP (fibreglass) or can supply them in colour.

https://i41.photobucket.com/albums/e...s/d87ecaa3.jpg

https://i41.photobucket.com/albums/e...s/755e066b.jpg


They sit flush in the original bonnet recess, and come with stainless fittings, as fitted to my own car.


https://i41.photobucket.com/albums/e...202010/115.jpg

https://i41.photobucket.com/albums/e...202010/096.jpg

They are produced by the same people who have worked on TVR's bodywork in the past, so quality is guaranteed.

I wouldn't promote or offer anything that I wouldn't use on my own car.

Prices are:

Bare GRP £100.00 delivered

GRP in colour £140.00 delivered


This is an open offer at the moment as I have had to have these made already, so time scale is not an issue untill they are all sold.

Any questions/enquiries please either PM me or post on here.

Many thanks, Neil. :)

scooby1664 13 February 2011 07:28 PM

take it you need a front mount for these :)

Neil.. 13 February 2011 07:46 PM


Originally Posted by scooby1664 (Post 9879709)
take it you need a front mount for these :)

Yes, sorry should have mentioned that *small* fact. :)

B0DSKI 13 February 2011 07:50 PM

No Carbon yet Neil ??

Neil.. 13 February 2011 07:52 PM


Originally Posted by B0DSKI (Post 9879776)
No Carbon yet Neil ??

No not yet Boyd.

They are making one for me to evaluate the quality, so fingers crossed. :)

Anger 13 February 2011 08:05 PM

Bare GRP £100.00 delivered

Yes please :D

James

Neil.. 13 February 2011 08:11 PM


Originally Posted by Anger (Post 9879826)
Bare GRP £100.00 delivered

Yes please :D

James

YHPM James. :)


BTW, I can take payment via paypal + 4% for the robbing fees, or bank transfer

No payment is required as yet, and they should be ready later this week.

Neil. :)

eggy790 13 February 2011 08:58 PM

are you able to get them to fit a bugeye sti bonnet?

Neil.. 13 February 2011 09:12 PM


Originally Posted by eggy790 (Post 9879952)
are you able to get them to fit a bugeye sti bonnet?

No I'm afraid not.

I'm sure Daren at ABW is producing for the bugeye. :)

Cannon Fodder 13 February 2011 09:46 PM

I might be interested in a painted (02C paint code) or a carbon fibre version, I'm having a FMIC fitted very soon and had bought a Kakumei CF reverse scoop but I do like these as well. :)

Neil.. 13 February 2011 09:50 PM


Originally Posted by Cannon Fodder (Post 9880124)
I might be interested in a painted (02C paint code) or a carbon fibre version, I'm having a FMIC fitted very soon and had bought a Kakumei CF reverse scoop but I do like these as well. :)

No worries, as soon as I have had a carbon one produced and happy with it, I will update this thread.

Gsung1 13 February 2011 10:41 PM

OMG! i have been waiting for so long for this... i dont get paid until 28th! I hope you still have them than :(

Neil.. 14 February 2011 08:23 AM


Originally Posted by Gsung1 (Post 9880283)
OMG! i have been waiting for so long for this... i dont get paid until 28th! I hope you still have them than :(

I'm sure if these prove popular, and they have all sold out by then I will be able to get another batch done. :)

Keep an eye on this thread, I will update it as often as I can.

Cheers Neil. :)

B0DSKI 14 February 2011 02:13 PM


Originally Posted by E_M_B (Post 9879782)
No not yet Boyd.

They are making one for me to evaluate the quality, so fingers crossed. :)

:thumb: Nice one Neil. Look top quality as ever M8. Put me down for a carbon one once they're ready

SkydiveMacca 14 February 2011 02:27 PM

Not interested in the vent, but holy moly, your car looks good!

fezza 14 February 2011 03:52 PM

Ooooh... i've been waiting for these!

If you still have any at the end of the month i may take one :luxhello:

Neil.. 15 February 2011 07:40 AM


Originally Posted by fezza (Post 9881228)
Ooooh... i've been waiting for these!

If you still have any at the end of the month i may take one :luxhello:

No worries mate, just give us a shout at the end if the month,

cheers Neil. :)

RE54 15 February 2011 02:41 PM

i would take one painted, give me a shout when this is about to happen.

i havent got my FMIC fitted yet, but should be anytime soon, so wouldnt hurt to have this waiting to go on.

thanks, rez

mikey30 15 February 2011 07:49 PM

been waiting to get a rcm c/f one but they are a bit pricey....i'll wait till you can supply and i'll have one...
if i was to get one of these ones here,can i have it painted in the obsedian black colour!!!
:thumb::thumb:



ps...where can the badgeless grill be got like on your car mate??

Neil.. 15 February 2011 08:07 PM


Originally Posted by RE54 (Post 9883023)
i would take one painted, give me a shout when this is about to happen.

i havent got my FMIC fitted yet, but should be anytime soon, so wouldnt hurt to have this waiting to go on.

thanks, rez


These will be ready by the end of the week.


Originally Posted by mikey30 (Post 9883642)
been waiting to get a rcm c/f one but they are a bit pricey....i'll wait till you can supply and i'll have one...
if i was to get one of these ones here,can i have it painted in the obsedian black colour!!!
:thumb::thumb:



ps...where can the badgeless grill be got like on your car mate??

I can paint it Obsedian Black no probs.

Badgeless grill is a DIY jobbie, get yer hacksaw out and chop it. :D


Once I have my hand on these, I wil contact people interested for either a deposit for those wanting painted ones, or full payment for anyone wanting a bare GRP version.

Cheers, Neil. :)

mikey30 15 February 2011 08:12 PM

put my name down for a painted one then...
cheers mate!!!!

pimpreza 15 February 2011 09:42 PM

i want one
 
Hi,

If sending one to the Netherlands is no problem, you can put my name down for one! Please painted in the not obvious color for a WRX, dark green.....

cheers mate
Pim

FroSt1 17 February 2011 10:30 PM

As it comes mate:thumb:
Let me know for payment.:D

turboturner 17 February 2011 10:53 PM

Liking the look of these..Tempted

Neil.. 18 February 2011 08:41 AM

OK chaps, update.

Initially I am concentrating on the GRP versions of these, either painted or bare.

Could anyone seriously interested please confirm on the below list,and those who want them painting please provide a colour code.

I will be requiring a deposit of £25.00 early next week, which can be paid for via paypal, or bank transfer.

1. Anger - bare
2. Cannon Fodder ?
3. Gsung ?
4. fezza ?
5. RE54 - painted
6. mikey30 - painted
7. Pimpreza - painted
8. FroSti - bare

Many thanks, Neil. :)

turboturner 18 February 2011 08:45 AM

Put me down then in bare please.

RE54 18 February 2011 01:43 PM

Il get paint code and pay full early next week. Thanks rez

pimpreza 18 February 2011 03:30 PM

paintcode
 
hi Neil,

The paintcode for my car is 29W. Let me know where and when I have to make my deposit with Paypal.

cheers
Pim

FroSt1 18 February 2011 06:48 PM

:thumb: ASAP for me :D

mikey30 18 February 2011 09:13 PM

havent got my car to hand at the minute..
anybody know the code for obsedian black on newage??


All times are GMT +1. The time now is 03:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands