ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Injectors for a GDB EJ25 (https://www.scoobynet.com/general-technical-10/868827-injectors-for-a-gdb-ej25.html)

1234michaelm 18 January 2011 07:18 PM

Injectors for a GDB EJ25
 
Can I get GDB top feed injectors to fit MY97 impreza if I change the fuel rails over. Also will the connector fit and work the injector.

Jolly Green Monster 18 January 2011 08:44 PM

lot of work when you can just get injectors that fit with adaptors.

1234michaelm 18 January 2011 10:34 PM

I can get GDB 800cc injectors with connectors for £150, that's why I asked. or I can get a Fuel Rail Kit with 600cc Injectors for £220, but that's for a GDA or GDB. So if I get the fuel rails will my plug fit on the injector and work

Jolly Green Monster 18 January 2011 10:46 PM

the plugs maybe possible to adaptor or you could pull the pins out and get the right plugs..

does Carl Davey for a kit to fit newage rails to classic manifold maybe?

Can do 550cc injectors for £325 but then you'd need £40 adaptors too.. so there is a saving.. but 550s just work with no issue... you might have complications..
what ecu is it on?

Simon

1234michaelm 18 January 2011 11:03 PM

I'm going 2.5 and I'm running power fc

1234michaelm 18 January 2011 11:15 PM

I don't know to much about the 2.5 but it was fitted in a wrx classic, the heads are off his 2.0 wrx


All times are GMT +1. The time now is 04:44 AM.


© 2024 MH Sub I, LLC dba Internet Brands