JDM hawkeye engine bargain
JDM hawkeye sti short engine with nitrided crank 30k miles, never run more than standard power. £1000 no offers collection from Pennine or direct from me http://images.ibsrv.net/ibsrv/res/sr...lies/smile.gif
Banny |
top
|
free bump for top seller
|
cheers eddy
|
Thats super cheap, wont hang around for long. Ideal upgrade for a classic.
|
bump for the new year
|
Amazed it hasn't gone, very cheap price for the best engine Subaru made :thumb:
|
Cheers Gary :)
|
bargin
|
Cheers Matt :)
|
tempted to ask you to save this for me and run silly boost through mine lol, must resist!
|
Price drop £900 no offers need this gone to clear some space
|
what power can these take banny standard ? ie not changing anything at all?
|
Originally Posted by BIG FUD
(Post 9841480)
what power can these take banny standard ? ie not changing anything at all?
|
That 100% what trq plz ? m after 450-450 in my white hawk and seeing what i can do with this engine ...
|
Stand to be corrected but I am sure i have seen results of 450/400+ with correct supporting mods. Banny is running over 500hp on his other 2.0l with meth.
|
Do these have forged pistons etc? I have a 2.5 2006 spec D with ppp and I think my piston lands are done. Will my heads fit and would it need a remap? Thanks.
|
Ye you will need a remap as i believe this is a 2.0l STi short motor. Should fit straight on with correct gaskets etc
|
if your hawk is uk.. 2.5 i dont think they are strong enough for 450/450.
this 2.0 jdm is probs the strongest of all newage engines which are known to take 450bhp with similar torque. jgm himself is running 500 on his blob engine. banny is running 523/420 on this exact engine in his car with standard v3 heads. so i should think 450/450 should be fine on these. |
Mine is uk 2.5 eggy and u right 350-380 at a push is its limits im running 350-350 at the min so would like to bolt this on and fit turbo 450-450 ish sent banny email so we will see the outcome many thanks for all youre help...
|
no worries fud, it will work with any heads, so your 2.5 heads will mate fine. could be a nice and cheap upgrade. :)
|
....
Originally Posted by eggy790
(Post 9841648)
no worries fud, it will work with any heads, so your 2.5 heads will mate fine. could be a nice and cheap upgrade. :)
|
Sold to Fud
|
top price and sold to a top bloke who will defo make use of it :thumb:
|
Originally Posted by eggy790
(Post 9841729)
top price and sold to a top bloke who will defo make use of it :thumb:
Thats how we roll kidda :thumb::thumb: no messing the way it should be in life and on here.... |
Unfortunately could not complete the deal with Fud, as his 2.5 heads will not mate with the 2 litre block as the combustion chambers are too large :(
|
Gutted is the only word banny ..
|
block includes oil pump, water pump, thermostat and tensioners :)
|
you ok mate?
|
bump
|
All times are GMT +1. The time now is 10:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands