engine manigment light on
what can cause the engine manigment light to stay on for about 3 min's when engine is started then go out,? is this start of a problem and if so what could cause this, am a bit worried now
|
Hi there if you have Bugeye/Blobeye WRX(bugeye WRX have worst/sensitive camshaft sensor) and if you are hitting the rev limiter for few times ecu will trigger CEL-check engine light and after few starts will disappear....
This is common faults/error on Bugeye WRX... And again if you have someone with obd reader will be good to find which error code has been(this code will be stored like historic code in ECU) |
There is only one way to find out whats causing it... plug in the two leads under the steering column and get the fault code (thats if you have a classic)
|
Yes I have v2 scooby the wires are still connected under the collum could it be that I have uprated
|
Yes I have v2 scooby the wires are still connected under the collum could it be that I have uprated the ecu?
|
All times are GMT +1. The time now is 09:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands