Massive clearout of newage parts
 

Below is a long list of newage parts that have been on my 2005 Blobeye STi at some stage in it's evolution. All are top quality parts and in good working order. Payment via cash, paypal or bank transfer only. Goods will only be sent once payment has cleared.

Prodrive PPP Exhaust
Consists of Backbox, Front Section and Sports Cat downpipe - 12000 miles
Superb burble, MOT friendly and good for around 380bhp.
£300 including next day delivery via ParcelForce (most of UK) - SOLD

http://i51.photobucket.com/albums/f3...dSportsCat.jpg

http://i51.photobucket.com/albums/f3...ExhaustTip.jpg

STi Top Mount Intercooler
Some bent fins (see photos) but otherwise in good working order. Including Y-pipe, pipe to connect to the throttle body and jubilee clip. 12000 miles
£180 - SOLD
£20 next day delivery via ParcelForce (most of UK)

http://i51.photobucket.com/albums/f3...TMICBottom.jpg

http://i51.photobucket.com/albums/f3...STiTMICTop.jpg

STi Pink Injectors
12000 miles
£160
£7 next day via Post Office Special Delivery (most of UK)

http://i51.photobucket.com/albums/f3...lInjectors.jpg

Power Enterprise 650cc Top Feed Injectors
In good working order and recently cleaned and flow tested. Some scratch marks externally (see photos)
£250
£7 next day via Post Office Special Delivery (most of UK)

http://i51.photobucket.com/albums/f3...cInjectors.jpg

KS3 Knock Analyser and Bosch Knock Sensor
As new.
£130 - SOLD
£7 next day via Post Office Special Delivery (most of UK)

http://i51.photobucket.com/albums/f3...nockSensor.jpg

http://i51.photobucket.com/albums/f3...S3Closeup1.jpg

Newage MAF Sensor x 2
Good working order.
£80 each
£5 next day via Post Office Special Delivery (most of UK)

http://i51.photobucket.com/albums/f3...r-SideView.jpg

http://i51.photobucket.com/albums/f3...or-TopView.jpg

ECU with ecuTek license
2005 UK STi 16-bit ECU
Most ecuTek mappers charge around £150 pounds for the ecuTek license. This ECU already has a license, so would save you this fee if getting an ecuTek remap for the first time.
£180
£9 next day via Post Office Special Delivery

http://i51.photobucket.com/albums/f3...TekLicense.jpg

ECU
2005 UK STi 16-bit ECU (no case)
£90
£9 next day via Post Office Special Delivery (most of UK)

http://i51.photobucket.com/albums/f3...05UKSTiECU.jpg

Apexi AVC-R Boost Controller and Boost Control Solenoid
Great condition. No scratches. Inlcudes manuals.
Two connectors will require resoldering (see photos).
£250
£10 next day via Post Office Special Delivery (most of UK)

http://i51.photobucket.com/albums/f3...ApexiAVC-R.jpg

http://i51.photobucket.com/albums/f3...BCSCloseup.jpg

Front O2 Sensor
15000 miles
£70
£5 next day via Post Office Special Delivery (most of UK)

http://i51.photobucket.com/albums/f3...15000miles.jpg

Front O2 Sensor
1000 miles
£90
£5 next day via Post Office Special Delivery (most of UK)

http://i51.photobucket.com/albums/f3...r1000miles.jpg

Rear O2 Sensor
15000 miles
£30
£5 next day via Post Office Special Delivery (most of UK)

http://i51.photobucket.com/albums/f3...arO2Sensor.jpg

Milltek Sport 3" Centre Section - MSSUB130
Milltek Sport 3" Backbox - MSSUB128
£220 - SOLD
£30 next day via ParcelForce (most of UK)

http://i51.photobucket.com/albums/f3...boxCloseup.jpg

http://i51.photobucket.com/albums/f3...PartNumber.jpg

http://i51.photobucket.com/albums/f3...andBackbox.jpg

Lateral Performance (GT Spec GEN 2 type, 3 bolt uppipe with venturi)
Zircotec coated and painted VHT matt black
£120 - SOLD
£10 next day via Parcel Force (most of UK)

http://i51.photobucket.com/albums/f3...turiUppipe.jpg

http://i51.photobucket.com/albums/f3...uricloseup.jpg

Prodrive Front Upper Steel Grill (powder coated metallic black)
£60
£10 next day via Parcel Force (most of UK)

http://i51.photobucket.com/albums/f3...allicblack.jpg

First dibs on boost controller and up pipe please!

Whats the diameter on the milltek? Sounds nice on you tube

sorry i wasnt reading it properly 3' seen it now :-)

Interested in PE injectors if open to offers?

Regards

have you got headers for sale ?

Interested in KS3 if open to offers mate

Could be interested in the exhaust

cash waiting for the ks3 whats your paypal

Lads I had a few pm's from folks who got in early, so they will get first dibs assuming they are prepared to pay full price, otherwise ...

PM me an offer.

No sorry mate.

Gary, you've got second dibs on the Milltek.

Steve, you've got second dibs on the KS3.

Would you sell the sports cat on its own, and if so how much? Would it fit onto the Blitz Nur Spec Exhaust currently on the car? Its a 2005 STi like yours. Cheers!

no worries mate

well let me know as soon as

cheers

steve

Sorry Sharpy, I'm not willing to split.

Very sorry Steve, the KS3 has gone.

Milltek and GT Spec Uppipe now sold.

Pics of the upper grille fitted? I have a debadged front grille so this could work well?

No sorry, but here is one of the lower grill fitted which is powder coated the same colour.

http://i51.photobucket.com/albums/f3...FrontPhoto.jpg

im interested in the mesh send me a pm if you still have it

Do you still have Maf sensor? I'll check part number is same? If so I'll have one. Will let you know at 3. How many miles have they done?

Fair enough, not quite the finish I'm after. Thanks though :thumb:

Do you know what size and where you got those air trumpets in your fogs though? Also how have you got them fixed in there?

Thanks :)

Yes, I still have two. One has done 13000 miles and the other 40000 miles, but I am not sure which is which any more. Both work and are clean and in good condition.

The air feeds are actually a set of OE fog light surrounds which can be bought from any dealer for about £40. Into these I fitted two alloy trumpets from E-Tech (140mm diameter at top and 96mm at the bottom) which slot in with a slight trim of the surround and are secured by a single bolt at the bottom. One is a cold air feed and the second feeds an oil cooler.

Funny you should say that. I have exactly the same.. Air filter on the drivers side, square oil cooler on the passenger side :)

http://sphotos.ak.fbcdn.net/hphotos-..._6113103_n.jpg

I've now got a lower Zunsport grille - similar to the Prodrive one you have. Was just considering the trumpets as they look nice on yours :)

Cool :D
Nic photo btw.

Thanks. :) I only had to trim some plastic out of the top of the fog light surround (flat bit) just so that the edge of the trumpet sits flat against the lip that would usually hold the fog light in place.

Sweet. I may well give that a go.. thanks mate :)

bump for Sunday

prodrive exhaust
 

has this been sold yet?
i noticed that someone else asked if you'd split because they wanted the sports cat?

i'd be interested in the prodrive back box so maybe there could be a 3 way deal?

thanks
Andy

Hi Andy,

Unfortunately I don't think the Prodrive CAT will work with Sharpy's Blitz system (assuming it's 3"), but I may be wrong.

If there is someone else interested in the CAT, then sure I am fine to split. £200 for the Prodrive CAT downpipe and £100 for the Prodrive backbox (postage included). The other front section piece will probably go on e-bay, or in the scrap bin, as I am not sure if there is much of a market for it on it's own.

Cheers
Richard

prodrive exhaust
 

Ok,
well i definitely want the back box and i'm happy with that price so can i grab first dibs?

dont suppose you fancy posting the sportscat separately to see if it gets any interest that way?

A.

Hi Andy,

Sure you can have first dibs. I'll try get another thread up over the weekend for just the CAT.

Cheers
Richard

Hi
any joy on the sports cat..or further thoughts on selling the back box separately?

Andy

Hi Andy,

Sorry I didn't get around to it over the weekend, but I've posted a seperate thread up now. Let's see how that goes.

Cheers
Richard

Hi,location please,and what gains would you get with prodrive exhaust over stock? :thumb: