help please
just done the head gaskets on my wrx 93 and it only seems to be running o n 3 cylinders but every now and again it will run on all four and its doing my head in tryed new coil pack injector and plug but still the same
|
I would start by doing a compression test to check the 'internal health' of the engine.
It might be a hydraulic lifter not being able to pump back up after they have been out ( assume you stripped and cleaned the lifters before re-assembly). Mick |
I would start by doing a compression test to check the 'internal health' of the engine. It might be a hydraulic lifter not being able to pump back up after they have been out ( assume you stripped and cleaned the lifters before re-assembly). wayne. |
Was correct thickness of gasket used for comp ratio...
|
Originally Posted by merlin24
(Post 9722059)
I would start by doing a compression test to check the 'internal health' of the engine.
It might be a hydraulic lifter not being able to pump back up after they have been out ( assume you stripped and cleaned the lifters before re-assembly). Mick |
well not got around to doing compression today but noticed that car has been runing fine most of the day and only runs on 3 every now and again but when its running on 3 and i give it a couple of revs it seems to come back to life for a bit
|
All times are GMT +1. The time now is 08:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands