pre-facelift classic induction pipe (resonator delete) WHERE?
soes anyone know where i cant this pipe????
cant find it anywhere.. http://drischnie.homeip.net/resoersatz.jpg http://us1.webpublications.com.au/st.../1605_12mg.jpg |
1 Attachment(s)
I have recently fitted the delete. I could not find the pipe either.
In the end i built my own. Cost around £45.:thumb: Attachment 66423 |
i have a freind who is selling one, pm your number and i'll pass it on to him
|
been looking for that one too - and no joy as yet!
|
1 Attachment(s)
|
thats the one my mate has if any of you are still looking for it
|
got mine from joz sounds brill
|
ok i like the apexi too, but hot air from under the bonnet??
|
Originally Posted by drischnie
(Post 9704464)
ok i like the apexi too, but hot air from under the bonnet??
It just works out a very expensive delete pipe.:lol1: |
:lol:
ive an hks filter on mine and if i pop the bonnet after a thrash it is stone cold! seems to catch heaps of air coming through gap in bonnet. Only time it's warm is when parked up and fan blows on it |
Originally Posted by b13bat
(Post 9704605)
It just works out a very expensive delete pipe.:lol1:
It was something like £40 from someone one here. :D |
Originally Posted by morandpeter
(Post 9704707)
ive an hks filter on mine
|
i made mine
probably cost 3 times as much as i couldnt find an apexi one at the time but hey-ho |
what do you mean? on the replacement element on it it has a higher micron rating thingy than k & n? im sure-ish
When i check the Maf etc it is always squeaky clean. Could I be letting crap into my engine? Hope not as I had a bottom end re-build in April past. Good god im getting paranoid now, should i go for the RCM big boy? |
Originally Posted by morandpeter
(Post 9705336)
what do you mean? on the replacement element on it it has a higher micron rating thingy than k & n? im sure-ish
When i check the Maf etc it is always squeaky clean. Could I be letting crap into my engine? Hope not as I had a bottom end re-build in April past. Good god im getting paranoid now, should i go for the RCM big boy? RCM used a K&N filter on the Gobstopper............... |
Originally Posted by mickywrx
(Post 9705288)
I seriously hope you don't think I paid that much!
It was something like £40 from someone one here. :D
Originally Posted by morandpeter
(Post 9705336)
what do you mean? on the replacement element on it it has a higher micron rating thingy than k & n? im sure-ish
When i check the Maf etc it is always squeaky clean. Could I be letting crap into my engine? Hope not as I had a bottom end re-build in April past.
Originally Posted by morandpeter
(Post 9705336)
Good god im getting paranoid now...
Fwiw. K&N alllllll day long.;) |
bump
|
1 Attachment(s)
Post #2 is your best bet. I got very lucky and found a second hand one forsale on here. The apexi wont create the correct angle if you plan on keeping the standard airbox
Mine Attachment 66437 Theres a chance ill be selling it mine in a month or the beginning January as im going FMIC and Induction kit and gonna do a bit of a custom set up like in post #2 Send me a PM and ill let you know when i decide its coming off. |
Originally Posted by DDS789
(Post 9742979)
Post #2 is your best bet. I got very lucky and found a second hand one forsale on here. The apexi wont create the correct angle if you plan on keeping the standard airbox
Mine http://i312.photobucket.com/albums/l...s789/003-4.jpg Theres a chance ill be selling it mine in a month or the beginning January as im going FMIC and Induction kit and gonna do a bit of a custom set up like in post #2 Send me a PM and ill let you know when i decide its coming off. |
It gives me wings!!!:norty:
Its wrapped around what i presume is the starter motor thing lol also got a motorhead wrist band on the brake fluid resovoir. Previous owner put them on and i havent removed them coz they look good :) |
Originally Posted by DDS789
(Post 9743009)
It gives me wings!!!:norty:
Its wrapped around what i presume is the starter motor thing lol also got a motorhead wrist band on the brake fluid resovoir. Previous owner put them on and i havent removed them coz they look good :) |
Originally Posted by mickywrx
(Post 9743790)
Wiper motor. ;)
|
What will resonator delete pipe improve? induction sound?
|
Originally Posted by mnem1c
(Post 9746127)
What will resonator delete pipe improve? induction sound?
I mainly did it for aesthetics.:) |
Can someone tell me, what are the benefits to de-resonating the induction track??
I might do my car if there is advantages |
anyone??
|
Better sound, as the resonator is in place to decrease induction noise. A straighter less interupted path for the air to flow through.
Its not gonna add an instant 10bhp or anything, but will maximize any potential gain with upgrades to the intake system. if you can find or make one then definately do it, if only to maximize any future mods. |
Thanks buddy, I think I will do something like b13bat has done
|
Originally Posted by Dazza9t9
(Post 9841152)
Thanks buddy, I think I will do something like b13bat has done
|
Thanks buddy, I will add that to my shopping list
|
All times are GMT +1. The time now is 09:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands