code 35 and no purge valve help
 

:confused:i have got code 35 and car in limp mode but there is no purge valve what can i do thanks

Refit the purge valve - you will only need to plug it in, no need to pipe it back up.

Or, find a suitable resistor to connect in place of it.

there is no wires to plug one in do u know what wires go to the fpv this problem is driving me mad. i did follow the loom today and found 3 wires taped up and they are connected to these thicker wires just behinde the manifold and they are not made like that i dont think. what kind of resistor could i use just want limp mode off its my first scooby and i dont go above 4500rpm i want to see what it has got thanks....