Breaking 3 classics
Breaking 3 classics / Wagon with performance parts VER 4 ENGINE AVAILABLE + TD05 20G
All parts available. . PM or Call me on 07977 036 032 Below is a list of all the performance parts available for the classic shape impreza :- Also all other general parts available e.g gear boxes, drive shafts, suspention, lights and panels ENGINE / Components 1997 WRX Ver 4 with 1 month warranty £495.00 Induction Kits 1x Pipercross air filter kit VER 3/4 - £25.00 1x K & N filter kit VER 1/2 - £35.00 1 x K&N Panel filter Ver 3-4-5-6 £20.00 1x Apexi Power Intake Ver 1-2-3-4 £50.00 Intercoolers 1x Front mount intercooler and hard pipe kit £150.00 1 x Mocal Oil cooler + sandwich plate £ 60.00 Fueling Adjustable Fuel Pressure Reg + Gauge £40.00 Walbro 255Ltr Pump + Sender unit £40.00 Turbos TD05 20G Turbo £395.00 IHI VF 24 £150.00 Exhausts Ninja bell mouth De-cat pipe £75.00 Feral Racing T304 Stainless inc ( Heat wrapped headers/up pipe/Bell mouth Decat Full 3" bore with 4" slash cut tail pipe 2 years old with recipt Cost £550) £295.00 Guages 2x Auto Guage Mechanical Boost guage £15.00 each N/S Electronic Boost guage with Peak hold function JDM £40.00 Boost Controllers 1x Blitz Dual - SBC + sensors and wiring £145.00 BOV's 1x Bailey twin piston type dumpvalve £40.00 ECU'S Apexi Power FC + Controller + AVCR Ver 3-4-5-6 £475.00 Ver 2 WRX Import Standard ECU £ 40 .00 Ver 3 WRX Import Standard ECU £ 40.00 Ver 4 WRX UK Standard ECU £ 40.00 Alloy Crank Pulley Lightweight £20.00 GEAR BOXES Import 1996 Ver 3 TY752VBCAA + Diff £295.00 Import 1995 Ver 2 TY752VB3FA + Diff £295.00 SUSPENTION 1x Juran alloy front strut brace £ 50.00 1x STI Fuji Industires carbon fibre front strut brace £ 75.00 2 x STi RA full suspension setups £100.00 per set KYB Shocks and 40 mm lowering springs £120.00 BRAKES Subaru 4 pot front brake calipers + Drilled / Grooved Discs +pads As new cond £225.00 2x Impreza 2 pot type R rear brake calipers + discs + pads £175.00 SEATS / INTERIOR 2x STI Ver 3/4 Front seats with red shoulders - £155.00 2x STI Type R Ver 5/6 Front seats with red shoulders upper/lower £195.00 1x STI Nardi steering wheel VER 3/4 - £ 30.00 1x STI Nardi steering wheel VER 1/2 £ 20.00 1x MOMO leather steering wheel + air bag VER 5/6 £ 60.00 WRC Alloy Gear Knob and Pedals £ 15.00 2x Center consol with armrest / compartment £ 30.00 each PANELS / BONNETS 1x STI Alloy bonnet VER 1/2 inc Vents £ 75.00 1x STI Alloy bonnet VER 3/4 Facelift Perfect Condition 230 White inc Vents £195.00 LIGHTS 2x Facelift Headlights Genuine £ 40.00 2x Smoked sidelights + side repeaters - £ 20.00 2x Angel Eye Twin Projector Head lights inc HID Kits £120.00 ALLOYS BUG EYE WRX Alloys Silver 215/45/17 5x100 PCD 2 new tyres £150.00 BUG EYE WRX Alloys Met Black 215/45/17 5x100 Pzeros all round £200.00 Fitting Service Available Call for prices. Paypal accepted. willing to post most items. Tel 07977 036 032 |
You Have PM :thumb:
|
Hi can you send me details or pics of the fmic and pipes thanks
|
You have PM :thumb:
|
interested in the front mount cooler do you have any pics
|
hi there the apexi fc and the avcr fit a uk version 6? can anyone map these? do i still use my own ecu with this? sorry for the dumb questions
|
Hi, yes this should fit a Ver 6 UK model, there may be a few wires that need to be changed. Most mappers are very familiar with the Apexi unit as a lot of Subarus are fitted with them. It is a complete stand alone system which replaces your ECU. The AVCR software is built into the ECU and comes with the AVCR boost solenoid. The best thing to do if you're unsure about this unit, is to put a post up on ScoobyNet.
Thanks Ryan |
Originally Posted by cossieboy599
(Post 9621435)
interested in the front mount cooler do you have any pics
http://s871.photobucket.com/albums/a...mpreza%20fmic/ Hope pics are ok. Any problems just pm me. Thanks Ryan |
yhm
Any injectors phase 1 ?? |
Originally Posted by BIG FUD
(Post 9622886)
yhm
Any injectors phase 1 ?? Thanks Ryan. |
Where about are you?
|
Do you have a camshaftpositionsensor (don't know for sure it's the correct name for it)?
|
Originally Posted by McPhie
(Post 9623212)
Where about are you?
Thanks Ryan |
Originally Posted by Barracuda_82
(Post 9623648)
Do you have a camshaftpositionsensor (don't know for sure it's the correct name for it)?
Thanks Ryan :) |
Originally Posted by ryanaircon
(Post 9624201)
hi, yes i have one £20 inc P+P.
Thanks Ryan :) Is the P&P including shipment to Holland? |
Can Sensor
Originally Posted by Barracuda_82
(Post 9624838)
Is it working good? No dents in the surface or something?
Is the P&P including shipment to Holland? I have been given a quote of £16 + Vat to ship unless you know any where that you can get it cheaper. Thanks Ryan. |
any pics of the oil cooler please
|
yhpm :)
|
All times are GMT +1. The time now is 02:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands