Breaking Hi spec JDM bugeye STI with twinscroll setup
 

As title,

All parts are available form the car not just the parts on the list if there is anything your looking for that isn't on the list just ask.

After a long hard think I have decided to break my bug to fund my other project. I’m gutted to have to do it but needs must and the car is worth more in parts to me.
There’s nothing wrong with the car it’s wanted for nothing.

The car had a full service when it went on the road last year 04/06/09 which consisted of
Engine oil and filter, cam belt, belt tension, plugs, fuel filter, coolant, pas fluid, brake fluid, gearbox and diff oils.
The engine had an oil and filter change not too long ago on the 08/06/10.

Here is a list of some of the parts available if there is anything not listed that you are looking for just let me know.

There are some pic's of the car in my profile.

V8/V9 JDM Engine. Engine type EJ207DW5CR £2000.00 covered 38,036 miles SOLD to WR 1mposter


APS Cold air induction kit. £180.00 SOLD to RICKSTER555

3" hayward & scott twinscroll de-cat down pipe heat wrapped. £180.00 SOLD to fiestaboy

Samco induction hose. black £120.00 SOLD to shepster

Samco airbox hose. red £35.00 SOLD to cannon fodder

Samco coolant hoses. red £45.00 SOLD to cannon fodder

Samco ancillary hoses. red £80.00 SOLD to cannon fodder

Turbo smart dump valve (twin port) £120.00 SOLD to stiphil

Walbro 255lph fuel pump.50.00 covered approx 800 miles SOLD to byers via TTS

STI topmount intercooler (no bent finns) £250.00

Zero/sports radiator plate. £40.00 SOLD to cannon fodder


J Speed flitch braces. OffersSOLD to Ricey Back up for sale back up for sale

Under car chassis/floor braces, Powder coated white. Offers SOLD to phil739

BC BR Series coilovers with 6/5 springs and custom length rear Damper adjusting extenders. £500.00 covered approx 500 miles SOLD to fred388

CARBING rear top strut brace £100.00

Front STI strut brace SOLD to kennyc

Full genuine Subaru body kit
front splitter. £200.00 inc bumper (no fog blanks) SOLD via fleebay
rear diffuser. £200.00 inc bumper
side skirt spats. £100.00 inc skirts SOLD via fleebay
side mirror covers. £100.00 inc mirrors
side mirror base covers. As above

Genuine V8 JDM STI spoiler. £350.00 or £430.00 with a pair of perrin stiffi's

Genuine subaru white/blue side repeaters and wing reflectors. £40.00

V8 JDM STI Defi style dash clocks. £200.00 SOLD to DisoDisp

V8 STI Gear knob. £30.00 SOLD to j555 hks via TTS pending collection

JDM black/charcoal carpet. £50.00 SOLD to Greate-One

Flocked top section of dash inc clock pod, speedo surround and steering column cowling.
Flocked top section of STI door cards.
Flocked A,B and C pillar trims all £250.00 SOLD to Darren via TTS

JDM non airbag STI Seats £300.00 F & R SOLD to jef

Bonnet £120.00

Scoop and under try £120.00 SOLD to bugeyejohn
Front wings £30.00 each SOLD via fleebay

Front door £60.00

Rear door £50.00 no glass

STI Int door handles chrome £40.00

JDM STI HID Head lights with ballasts £450.00

Rear lights with tinted indicators £45.00 SOLD to matthew revell

JDM 6 speed Gearbox setup (non DCCD) G/B code TY856WB1CA £2000.00 SOLD to Gipa via TTS

X reg Shell with id and MOT £500.00 Cheap tax due to it being an import. taxation class is PLG. absolutely mint never damaged.

All parts are + delivery and paypal fees but can accept other methods of payment if need be.


Anyone wanting pic's can you please pm me your email address and the part you are interested in.

http://i6.photobucket.com/albums/y23...ne-10011-1.jpg





http://i6.photobucket.com/albums/y23...ne-10012-1.jpg

http://i6.photobucket.com/albums/y23...z/ad3fd641.jpg

http://i6.photobucket.com/albums/y23...oz/ebay218.jpg

http://i6.photobucket.com/albums/y23...trandom076.jpg

This is just to give an idea of how clean the car is.

http://i6.photobucket.com/albums/y23...eye-STI082.jpg

http://i6.photobucket.com/albums/y23...eye-STI088.jpg

Any pics of the J speed braces? and a rough price to the underside braces?
Let me know as interested.

Ricey

Intrest on wind deflectors pending pics

Here some pic's of the flitch braces fitted, they are the best pic's i have at the mo

http://i6.photobucket.com/albums/y23...eye-STI129.jpg

http://i6.photobucket.com/albums/y23...eye-STI130.jpg

Here some pic's of the floor braces before i fitted them after powder coating, they still look pretty much the same now.

http://i6.photobucket.com/albums/y23...trandom001.jpg

http://i6.photobucket.com/albums/y23...trandom005.jpg

http://i6.photobucket.com/albums/y23...trandom006.jpg

Not sure what these are worth I know they are expensive new but not sure what they are worth second hand that's why i was looking for offers on these items.

PM sent re braces.

Ricey

the braces are still on the car with the wings on it may be a couple of weeks before the wings are removed as the car needs to be driven before i sell the engine and running gear i am looking for offers on the underside braces i may be able to get pic's of these fitted and would need your email address to send to.

Can you pm me your email addy and i will send some pic's i would not want to post these as they always get broke as i have read in many threads on here.

I'm in no rush for the braces, as I still have break mine too so I can sell everything I need too before the restore :0(

Thanks
Ricey

I have some pic's of parts in my photo bucket account so if i have them in there i can post them up but if not I'll have so sort pic's out when I'm at home or my dad can post some up or email the for me.
I'll do my best I'm hoping the little one will be home in the next couple of days :?

How much for the inlet manifold? Bear

Hi have u got a fmic forsale if so can I have 1st refusal money weighting also have you got a pic of boot and spoiler jimmy

The manifold will be left on the engine

The car has a top mount intercooler

Sure you want to leave it on I'll give you a good price!

Its a V7 manifold not the same a V8

any chance you would consider selling the exhaust system (manfold and eveything back) seperate? might take the turbo too if you are willing to split.

i'll take the bonnet scoop and undertray.
thanks

Price for brembo,s please

Are you looking for the twinscroll headers, up pipe, turbo with all pips brackets heat shields, H&S down pipe center section and back box?

fozi you have pm

Do you want the front and rear brembos or just front's ?

Front and rear please mate.

Scoobymoz................hope the little one gets better soon :)

I'll wait for the frenzy to finish and see what's left, I bought some silver handles for my bugeye interior from you about 5 years ago...........they are still in the garage LOL

Shaun

do you have the "leather" or surround from the gear stick?

darc

Do you have a Simtek or similar aftermarket ECU, I know there isn't anything listed but on the off chance...:)

I though I recognised your user name. yes i hope the little one is better soon I'm sick of the sight of the hospital :cry: I'm hoping he will be home tomorrow!
I can't believe you haven't fitted those door handles yet :eek:

Yes I have a few of those laying around, all are in good nick I can do one of those for £30.00 + delivery if that's any good to you.

Sorry I don't the car is running a standard ECU which has been mapped by Andy F

how much for the seats and door cards please, also do you have pics
??????

pics and best price for Genuine subaru wind deflectors and coilovers del to ka12 9ng

scotland0877@aol.com

theres no hurry mate, hope the wee man get better soon

cheers tom

The front and rear seats are £300.00 and £80.00 for a set of door cards all in mint condition, If you send me your email address i'll send you some pic's

Thanks tom I'm hoping he will get home today :(

The coilovers are £500.00 and delivery will be around £30.00 as they are rather heavy and will have to be packed in 2 parcels. The wind deflectors will have to be collected as they would get broke if i send them.

I'll send some pic's as soon as I can.


All pm's replied to.

Pm me your paypal for wind deflectors

Wiley

They will be fixed to the trims to make them easier to fit.
I cant send these as they will get broke, but if you want to take the chance i will pack them for you. but will accept no responsibility for DAMAGE
ALL ITEMS are + delivery and 4% paypal fees

is the downpipe only suitable for a 3 inch exhaust or does it mate to std system.

It's only compatible with a 3" system with a flange fitting on the center section.

I'll take the Samco airbox hose, I'm assuming I can use it to join my RCM induction kit to the turbo intake hose.

PM your paypal and price inc delivery and 4% fee and I'll send the payment. :thumb: