ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ICE (https://www.scoobynet.com/ice-2/)
-   -   Fitting Amp to my WRX. (https://www.scoobynet.com/ice-2/848927-fitting-amp-to-my-wrx.html)

acemodder 30 August 2010 06:36 PM

Fitting Amp to my WRX.
 
Hey guys

I want to fit an amp and sub to my 2001 WRX.

I need to feed a power cable to the battery from the amp in the boot. However to save me pulling the whole dash out, can you tell me if there is an easy entry point from the dash to the engine bay to feed the cable?

NEILB1 30 August 2010 07:29 PM

i have took mine through a big rubber bung, IT's to the back of the right hand side of the engine

acemodder 30 August 2010 10:45 PM

Found it :) Fitting done, now I need to work out if I have broken the phono cable, as no audio is coming through my sub, and I have squashed the cable half way along :( Any idea on how to check with without buying another cable?

BlueBugEye 31 August 2010 06:36 AM

Try a volt meter! Or a bulb between one end and a battery on the other! Also if the H/U has a sub out is it turned on?

NEILB1 31 August 2010 07:15 AM

do a continuity test with the cable but to crush wire and for it not to work will need alot of force really. if not for the sake of a few £ go get another on fella and be carful this time lol

acemodder 31 August 2010 09:09 AM


Originally Posted by BlueBugEye (Post 9574617)
Try a volt meter! Or a bulb between one end and a battery on the other! Also if the H/U has a sub out is it turned on?

The 12v feed and the live feed from the radio are both fine, as my amp LED powers up when the ignition is one. However no audio!

The amp/sub worked fine in my old car.

acemodder 31 August 2010 01:22 PM

Ah fixed it!

Earth wire was damaged :) Replaced and fixed.

acemodder 31 August 2010 09:10 PM

Right, after fitting the 12v from the battery and feeding it through the hole into the drivers footwell I didn't feel comfortable with it being lined also along behind the intercooler due to the heat and possibility of melting the cabling. (Plus feeding the wire across the engine bay limits the amount of cable into the boot and the tighness keeps pulling the 12v from the amp port). So I have pulled out the 12v cable and tried to feed it through the "right side of the engine" so it falls behind the air con unit behind the glove box, thus stopping the risk of melt-down.

However I cannot manage to feed the cable from the engine bay into the passenger footwell. The only "bung" I can see was over this hole - however I have fed the cable into that hole and it seems to be a enclosed area between the bulk head of the engine bay and the hole. Am I feeding it into the right area?

See pics (sorry it was getting dark and iphone camera isnt the best)

http://i406.photobucket.com/albums/p...r/IMG_0172.jpg

http://i406.photobucket.com/albums/p...r/IMG_0171.jpg

NEILB1 03 September 2010 08:47 AM

is there a rubber bung right below that about a foot or so, As there is on my newage ?


http://i278.photobucket.com/albums/k...00903-0848.jpg

acemodder 04 September 2010 08:46 AM

Yes and it's now fitted via that bung :)


All times are GMT +1. The time now is 07:25 AM.


© 2024 MH Sub I, LLC dba Internet Brands