How do you take off the door sills ? - 03 Blobleye WRX
Hi ,
Im installing an amp for a sub in the boot , Iv got the 4G power lead through from the engine bay to the passenger side footwell and the remote lead and RCA lead from the headunit coming through to the drivers side , I heard you can run them in a channel under the door sills but cant see how to get them off , There is a black plastic thing on there but i dont want to break anything :) , Anyone know how to take the door sills off so i can run my wires through ? |
You need to take off the B pillar trim below the seatbelt first, then you can unclip the trim.
|
Originally Posted by redwards
(Post 9541975)
You need to take off the B pillar trim below the seatbelt first, then you can unclip the trim.
Thanks |
the B pillar is the frame between the front door and rear door i.e where your seat belt is attached to
hope this helps :thumb: steve |
Do the clips just pull out if i give them a good tug ? I was going to try but was afraid of breaking anything
|
All times are GMT +1. The time now is 01:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands