Breaking my 470/420 facelift
After blowing my big end @ santa pod a few weeks back i was going to rebuild it but have decided to break the car as i cant justify another rebuild unfortunalty.
the closed deck block and v5/6 heads are beeing machined and heads skimmed as we speak ..so should be avalible next week i have started to break the car but still a few bits to get off ..which will hopefully be done by next week !! im located in dorking surrey and would prefere for bits to be collected as i work stupid hours mon-friday and only chance to post would be on a sat . i have already posted the list on my local site so some bits have been sold or prov sold but if anything falls through i will let you know . if there's anything you cant see or need just pm me and i will see if i still have it Cheer's Tom List Edited ..remaining parts avalible .. low milege JDM 6 speedgearbox+ r160 3.9 diff prop and linkage to fit straight in any uk model £2300.00 used wisco forged pistons (2000 miles max ) with a set of new rings in packaging £250.00 full leather interior near mint condition with gen subuaru fire extinguisher £300.00 470bhp owen devolments garret ball bearing turbo £ 650.00 prov sold closed deck block homened and skimmed £370.00 prov sold gen subaru crystal fogs £50.00 white line anti lift kit £100.00 gaz adjustable coilovers £400.00 coilpack wiith leads £40 bk racing 18" alloys good condition in gold with 4 new nexon tyres £400 there's a lot more that i have prob forgot about but will add as come accross it |
Got any pics of the interior? I'm also interested in the headlights. Would collect if taking both, but don't fancy travelling from Bristol just for 2 headlights!
PS - also need the "clockspring" connector from behind the steering wheel if you have? |
yep can get some pics too you no worries will get some tommorrow and get them over to you just pm me your email :thumb:
might have a spare clockspring will need to check thought |
Have you got a V6 STi spoiler going? Cant see any photos if you've put them up as at work
|
is it an ra??? roof lining............
|
not an ra unfortunatly beef ...had a few parts of Angers ra when he broke it .
so no roof lining . Spoiler was sold with shell unfortunatly Chap |
Fook me, headers went quick! 2nd dibs if they come back up for sale. How many miles have they done?
TX. |
Its a shame it has to be broken Tom... but needs must
Tom can totally be trusted people :thumb: |
Originally Posted by Terminator X
(Post 9522803)
Fook me, headers went quick! 2nd dibs if they come back up for sale. How many miles have they done?
TX. not many atall unfortunatly i wish i had 10 sets of these as the amount of people after them i could have made some serious cash .:thumb: |
Pictures of the seats please :thumb:
|
Cheers Anger
you know how sad i am too see it go .. a few pics of the wheels and engine bay parts etc can get better pics of anything else if needed https://www.scoobynet.com/[IMG]http:...nkey/006-3.jpghttp://i42.photobucket.com/albums/e3...9d4ac846_o.jpg http://i42.photobucket.com/albums/e3...nkey/006-3.jpg http://i42.photobucket.com/albums/e3...nkey/020-1.jpg http://i42.photobucket.com/albums/e3...donkey/005.jpg |
Nice looking car fella, shame she broke at the pod :( What caused it?
TX. |
Acl bearing on number 3 went which bugged crank crower rod etc
so much for forged being strong lol i was going to fix it up too last week even had block and heads getting prepped over at smg but lack of work in the last 4 months and future not looking good ..i just couldnt justify spending another few k on the rebuild ..it owes me around 15k to date in parts and labour ... no doubt if work pics up ..will start a new project prob with a newage ...but with wife kids and morgage these are my main priority at the moment shed a few tears breaking her but hey i have had so much fun driving her and learning building it ..its not all a waste :thumb: |
Hi Tom...wanted to know if your induction kit will fit my rb5 t reg...also do you have a turbo shield available for my car as I took mine off and now I'm worries turbo heat will burn everything under my bonett...I also wanted a induction scoop for driver side...please let me know, or give me your number or take mine 07725583492, as I need a few parts pal...
|
Originally Posted by subarurb5100
(Post 9523155)
Hi Tom...wanted to know if your induction kit will fit my rb5 t reg...also do you have a turbo shield available for my car as I took mine off and now I'm worries turbo heat will burn everything under my bonett...I also wanted a induction scoop for driver side...please let me know, or give me your number or take mine 07725583492, as I need a few parts pal...
Pm sent :thumb: |
are the coilovers height adjustable?
pics , how old? link to which ones they are aswell please |
I too can say Tom is totally trusted worthy and can say its a shame it has to be broken.
|
Originally Posted by phil739
(Post 9523262)
are the coilovers height adjustable?
pics , how old? link to which ones they are aswell please Coilovers are height adjustable and all rings are free and move with no problems ...they have covered about 6000 miles and are in good condition will get pics tommorrow to you if you pm me your email add will have to get model number of them aswell if in doubt just google Gaz coilovers for impreza and you will get a rough idea of what your looking at . Tom |
Hi Tom thanks for the reply...does the induction come complete with the whole fitting kit and all required bits to fit it...have you still got the small bonnet induction scoop drivers and passenger side...what the price for induction kit and delivery...where you located...
|
Originally Posted by subarurb5100
(Post 9523288)
Hi Tom thanks for the reply...does the induction come complete with the whole fitting kit and all required bits to fit it...have you still got the small bonnet induction scoop drivers and passenger side...what the price for induction kit and delivery...where you located...
,small bonnet scoop has gone with the shell yes green induction kit will fit facelift maf located in dorking surrey ...as stated on first post would prefere pick up Tom :thumb: |
First choice on the simtec if it comes up again please cash waiting!
|
Originally Posted by Scoobdogg
(Post 9523357)
First choice on the simtec if it comes up again please cash waiting!
pm sent :thumb: |
Originally Posted by chaos1980
(Post 9523284)
Coilovers are height adjustable and all rings are free and move with no problems ...they have covered about 6000 miles and are in good condition
will get pics tommorrow to you if you pm me your email add will have to get model number of them aswell if in doubt just google Gaz coilovers for impreza and you will get a rough idea of what your looking at . Tom pm sent mate cheers phil |
if the clocks will fit a uk my00 and have the rev counter in the middle i will take these as well
|
Yes clocks have rev counter in middle sent a pic along with coilover pics
rev counter go's to 9000 Tom :thumb: |
i will take clocks as long as all working fine kph isnt a problem
|
Has the front bumper gone with the shell or is it available?
|
Originally Posted by si2000
(Post 9523815)
Has the front bumper gone with the shell or is it available?
gone with the shell unfortunatly si |
Originally Posted by chaos1980
(Post 9523906)
gone with the shell unfortunatly si
|
List updated :thumb:
|
All times are GMT +1. The time now is 12:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands