335mm brake kit
hey,
im looking for the 335mm brake kit minus the pads i think they re for the standard 4 pot calipers anyone know where they sell these cheaply been looking on godspeed is this the only place? thanks for replys and advice :thumb: |
The only "conversion" using the OEM calipers I have seen is Ian Godney's kit (Godspeed). :D
Shaun |
yes thats all i can find...but for £500 + might aswel buy some brembos
|
I saw a 335 conversion kit on ebay but wouldn't touch cheap brakes, or some from an unknown source ! I have the godspeed conversion on my car and they are very good, and a match for any brembo set up, I know a lot of people who complain of brake fade with brembos ......
|
Does the Godspeed 335mm conversion fit under the MY97-00 OEM 16" alloys 5-spoke "curvy" alloys? Or are 17"+ required?
|
17" as a minimum I'm afraid...
Originally Posted by joz8968
(Post 9519389)
Does the Godspeed 335mm conversion fit under the MY97-00 OEM 16" alloys 5-spoke "curvy" alloys? Or are 17"+ required?
|
No worries - thanks.
|
Originally Posted by BBB3
(Post 9519146)
yes thats all i can find...but for £500 + might aswel buy some brembos
|
Second hand Bremobos may be nearer 500 lol?
|
Originally Posted by Saalro
(Post 9520064)
Second hand Bremobos may be nearer 500 lol?
My 335mm kit uses a larger disc and pad than the Brembo STi ones , In my 335mm kit you get a 2 piece disc and bell and a choice of pads , Ferodo DS2500 being one of them , pound for performance the are pretty much unbeatable Cheers Ian |
Ian- Does your 335mm conversion use a proper race disc or a modified road disc with bell bolted to?
|
Originally Posted by sc_sjo
(Post 9520246)
...33mm conversion...
|
Originally Posted by joz8968
(Post 9520285)
A Meerkat car?! :D
|
Lol a 33mm disc would prob be big enough for a Meerkat car lol. 330 would be for a human lol.
|
i can get a pair of front brembos with disc's and pads (standard ) for £400
|
Originally Posted by sc_sjo
(Post 9520246)
Ian- Does your 335mm conversion use a proper race disc or a modified road disc with bell bolted to?
Its a disc I have cast specially for me , and I machine it from there to a finished product.
Originally Posted by BBB3
(Post 9520303)
i can get a pair of front brembos with disc's and pads (standard ) for £400
Cheers Ian |
ok....i have got rota boost alloys they got loads of room behind them,
so £575 is the best price for the 335mm kit? |
All times are GMT +1. The time now is 03:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands