Originally Posted by Mad Hammer
(Post 9505947)
Got you, did you not have a white Type R ?
Yes I did another 2.1 stroker but built by enginetuner, thought I'd give it ago myself this time round :) |
Originally Posted by 786omar
(Post 9505962)
Yes I did another 2.1 stroker but built by enginetuner, thought I'd give it ago myself this time round :)
|
Heads have been built / ported / machined by my mate who has been porting and running a engineering shop for over 10years, the block has been machined and prepared by Lateral, I'll be assembling the short motor / long engine myself under the supervision of my mate who built my heads, everything else on the car will be done by myself bar the mapping which will be done by Paul at zen
|
Very best of luck with it mate, these 2.1's are catching on.
|
Originally Posted by Mad Hammer
(Post 9506010)
Very best of luck with it mate, these 2.1's are catching on.
|
Originally Posted by 786omar
(Post 9505922)
Thanks what happened to your RA ? Any plans for the newage?
Its no slouch with 433bhp 472lbs/ft... but have just got a CDB and im still deciding on what route to go with a new engine over the winter |
yes i did mate, sold that one tho, got another 2 door now that should be a bit quick when finished.
good luck with yours, i do like the spec andy h |
Originally Posted by 786omar
(Post 9505952)
Lol thanks I was waiting for someone to comment on the rug, still not as bad as banny's legendary carpet!
Banny |
Cant wait to get a ride in this mentalist motor when its finished!!
|
Nice job.
|
Some pics of the heavily ported heads, supertech valves lapped in, valve seats 3 angle cut, JUN valve springs and retainers fitted and all shimmed up to suit the piper 276 cams....
http://i173.photobucket.com/albums/w...R/DSCF0064.jpg http://i173.photobucket.com/albums/w...R/DSCF0058.jpg http://i173.photobucket.com/albums/w...R/DSCF0056.jpg http://i173.photobucket.com/albums/w...R/DSCF0065.jpg http://i173.photobucket.com/albums/w...R/DSCF0073.jpg http://i173.photobucket.com/albums/w...R/DSCF0074.jpg http://i173.photobucket.com/albums/w...R/DSCF0072.jpg http://i173.photobucket.com/albums/w...R/DSCF0071.jpg http://i173.photobucket.com/albums/w...R/DSCF0063.jpg |
Originally Posted by Mad Hammer
(Post 9506010)
Very best of luck with it mate, these 2.1's are catching on.
Nice spec list Omar - good luck with it. Am sure it will be a goodun! :thumb: |
Originally Posted by JP4
(Post 9512309)
Not tempted are we...... :D ;)
Nice spec list Omar - good luck with it. Am sure it will be a goodun! :thumb: Clive |
Omar spec list looks good and the teaser pics very nice. Good luck with the build mate i'm sure you wont need it though :thumb:
Lol Clive your not the only one i have 2 spare CDBs + 3rd CDB is built and awaiting me to finish the head work and just bolt it up. Probably keep the other 2 as pension funding lol. |
Originally Posted by STI_Baly
(Post 9512391)
Omar spec list looks good and the teaser pics very nice. Good luck with the build mate i'm sure you wont need it though :thumb:
Lol Clive your not the only one i have 2 spare CDBs + 3rd CDB is built and awaiting me to finish the head work and just bolt it up. Probably keep the other 2 as pension funding lol. |
Originally Posted by STI_Baly
(Post 9512391)
Omar spec list looks good and the teaser pics very nice. Good luck with the build mate i'm sure you wont need it though :thumb:
Lol Clive your not the only one i have 2 spare CDBs + 3rd CDB is built and awaiting me to finish the head work and just bolt it up. Probably keep the other 2 as pension funding lol. Bally, would you have a spare set of bolts that hold the two block halfs together that I could buy off you? |
Originally Posted by Anger
(Post 9506101)
Needed a change and sold it in bits what payed for the new age
Its no slouch with 433bhp 472lbs/ft... but have just got a CDB and im still deciding on what route to go with a new engine over the winter |
Originally Posted by 786omar
(Post 9515498)
Bally, would you have a spare set of bolts that hold the two block halfs together that I could buy off you?
Have you tried Mattybr5? hes on here too....send him a PM and just let him know that i put him in the frame to look for a set. :D Will also have a rummage for you tomorrow mate if i get a chance as i usually get in quite late from work. :thumb: |
Omar tried to look but had no Joy mate....i need to sort the garage out as have far to many boxes of scoob bits just thrown into plastic boxes..Sorry mate.
|
Originally Posted by STI_Baly
(Post 9519585)
Omar tried to look but had no Joy mate....i need to sort the garage out as have far to many boxes of scoob bits just thrown into plastic boxes..Sorry mate.
|
An update on the build guys, ..look what I just bought - a complete mint Sti4 Type R Rolling shell less running gear shes even got TAX and MOT :P It will save alot of time as its pretty much ready for me to drop the running gear in to
http://i173.photobucket.com/albums/w...R/b2b2c578.jpg |
take it that was muz's car....
|
Yes :)
|
Very nice spec list omar should be an animal when finished, iv still not got the rods and pistons in the block yet (i bought the crower rods and cp pistons from you couple months back).
Will be keeping track of this thread mate, keep up the good work :thumb: |
Originally Posted by worbs
(Post 9526301)
Very nice spec list omar should be an animal when finished, iv still not got the rods and pistons in the block yet (i bought the crower rods and cp pistons from you couple months back).
Will be keeping track of this thread mate, keep up the good work :thumb: |
Originally Posted by 786omar
(Post 9527604)
Thanks, just read your thread the car is looking good :thumb:
Thanks mate, its getting there, slowly lol. pretty chuffed with my proggress so far seeing as im not a mechanic in anyway lol. |
Nice thread Omar..:thumb:
How come you have started from scratch again after building the last 2.1stroker?? Which incidently has just completed its first full trackday and didnt miss a beat!! with just the addition of coilovers, whiteline bars, links and ALK and a front brake change to Ksports. |
Originally Posted by jayallen
(Post 9533925)
Nice thread Omar..:thumb:
How come you have started from scratch again after building the last 2.1stroker?? Which incidently has just completed its first full trackday and didnt miss a beat!! with just the addition of coilovers, whiteline bars, links and ALK and a front brake change to Ksports. After selling the car I went over to a RX7 and then a Soarer, but they were no match to the Type R you now own so I felt the need to build another but this time doing as much of the work myself, it's abit boring handing your money over to someone and letting them build your car for you...So I thought I'd give it ago myself :) Any recent pics of the car or videos of it on track? |
Long block is now finally assembled I'll get some pics up during the week of the assembly process, in the meantime thought I'd post a pic up of the wheels that I collected from Ruislip tyres a few weeks back
http://i173.photobucket.com/albums/w...2_562771_n.jpg |
Nice wheels, Rota Fighters's?
Thanks to you & Musti for the R180 diff on the weekend mate :) |
All times are GMT +1. The time now is 07:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands