Power FC/FC-edit injector settings
 

Hi all,

I probably found the right latency values at several voltages on Nasioc (http://forums.nasioc.com/forums/arch...t-1142025.html)
My injectors are the Power Enterprice SH850FB. The 14 volt latency is all the same for all 850cc injectors. I assume the other values are the same as well, just another housing around them.
The how to on newcelica.org didn't 100% answer my question.

Attachment 66215

The injector lag vs batt voltage is correct assuming the values on Nasioc are correct. Do I have to add the correction on the left side, under injectors or am I putting a correction on a correction then? The 10 volt and 8 volt values are just a guess.

The problem I'm having now is that the engine stalls at idle when hot. The latency vs voltage values were way off, so I hope this helps.

I think I have to rescale my MAF anyway, so let's do it right the first time then.