![]() |
Remapping ??
If was re mapping a UK STI 2.5, where is the place to take it. Ive been looking at place's like Scoobyclinic, lichfeild imports and scoobyworld but is there anywhere else? Also do need uprated fuel pump if re mapping?
|
www.enginetuner.co.uk in Plymouth
|
There is http://www.jollygreenmonster.com/Jol...ster.co.uk.htm
or Bob Rawle,who remapped mine http://www.brdevelopments.com/aboutus.html Both have a great reputation. |
where are you based fella???? ...jgm would get my vote...
|
+1 for simon aka jgm carnt fault him and he can come to you
|
I've used Duncan http://www.racedynamix.com/new/ Many times and the service and results are bang on the money :D
|
+1 for Scoobyclinic. Pat has done an excellent job on my Type R V-Ltd
|
From stoke so midlands area. Wouldn't mind travelling but not too far lol
|
Originally Posted by P555SBR
(Post 9475211)
+1 for simon aka jgm carnt fault him and he can come to you
How much does the bloke charge? I have a 53 wrx and would like to know what extra power a remap would give me. I'm guessing I'll need to add a de cat and an up pipe etc for best results. But i would rather just have ecu tweaked for more power if possible. Cheers |
Originally Posted by chris 111
(Post 9475348)
From stoke so midlands area. Wouldn't mind travelling but not too far lol
|
Originally Posted by dynamix
(Post 9475444)
I am over in Stoke every month (if not slightly more often) mapping there for the members the Staff Subaru Club.
What software do you use? |
I charge £350 for a full custom remap
I use a range of open source and commercial software (non ecutek). Ask a few of the SSC guys (and girls) what their experiences are :thumb: |
Originally Posted by dynamix
(Post 9475789)
I charge £350 for a full custom remap
I use a range of open source and commercial software (non ecutek). Ask a few of the SSC guys (and girls) what their experiences are :thumb: |
What mods have you made to the car ?
|
Originally Posted by dynamix
(Post 9476903)
What mods have you made to the car ?
|
you would need a few bits to make it worth doing, dynamix has Some basic experience with 2.5 sti :lol1: (time attack car :notworthy)
|
Lol
You should be looking at around 320-330bhp from just the panel filter and centre and backbox changes. A little more if decat centre and more still without the downpipe cat. Lots more torque than standard too :cool: |
Oh and launch control and flat throttle shifting too :D
|
Originally Posted by chris 111
(Post 9476609)
What power increase's are we looking at?
The torque figure is the only one you should be interested in seeing an increase in. Yes you will need an uprated fuel pump. (and some exhaust bits, depending on your car) I can highly recommend Richard, who is 'fiestaboy' here on Scoobynet. Greg :) |
All times are GMT +1. The time now is 12:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands