ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Wanted (https://www.scoobynet.com/wanted-18/)
-   -   Shopping List for 07 hawkeye (https://www.scoobynet.com/wanted-18/835800-shopping-list-for-07-hawkeye.html)

MoonSpaceMan9 03 June 2010 05:08 PM

Shopping List for 07 hawkeye
 
Hi guys and girls

I'm hoping some of you might be able to help me out with a few bits for me scooby , I've had the pleasure of driving my uncle's modified hawkeye 4 a week or so and the bug has bitten :P
I think the following would be a good start ? what do you all think ?
Feel free to chime in with other idea's and part's prices or link's :)

Full Decat exhaust ( and am I right in thinking a map is needed if I decat the turbo up/down pipe ? )

Injectors and fuel pump

FMIC

Some kind of Panel filter ( or do I go with the cold feed induction ? )

Flywheel

Front and Rear braces

Quick shift

RHF rack end as mine is a little bent :cry:

A good mapper

I'm hoping to get the bits together, fit them than get her mapped

I'm located in Essex near Southend , And will probably tag along to the poser's cruise on Saturday

Cash waiting

Thanks for reading

MoonSpaceMan9 04 June 2010 11:52 AM

bump

Tomwrx 04 June 2010 02:30 PM


Originally Posted by MoonSpaceMan9 (Post 9430718)
Hi guys and girls

I'm hoping some of you might be able to help me out with a few bits for me scooby , I've had the pleasure of driving my uncle's modified hawkeye 4 a week or so and the bug has bitten :P
I think the following would be a good start ? what do you all think ?
Feel free to chime in with other idea's and part's prices or link's :)
Full Decat exhaust ( and am I right in thinking a map is needed if I decat the turbo up/down pipe ? )
Injectors and fuel pump
FMIC
Some kind of Panel filter ( or do I go with the cold feed induction ? )
Flywheel
Front and Rear braces
Quick shift
RHF rack end as mine is a little bent :cry:
A good mapper
I'm hoping to get the bits together, fit them than get her mapped
I'm located in Essex near Southend , And will probably tag along to the poser's cruise on Saturday
Cash waiting
Thanks for reading

yes it safer to get it remapped if u change the d/pipe
no need for bigger injectors as the hawkeye wrx already has the bigger 550 sti injectors as standard.
fuel pump get a walbro around 70 quid
no need for a fmic unless goin above 400bhp.
panel filter (green, k@n etc) around 35-45 new

MoonSpaceMan9 05 June 2010 06:07 PM

Thanks for the advice

Anyone got any parts ?

dynamix 07 June 2010 07:54 AM

You wont need bigger injectors - yours are fine for up to 400bhp and you dont want to go above that onthe std engine (hence no need for fmic either)
Panel filter - go cosworth for £30 new they are v cheap to start with.
Flywheel - not needed until you change the clutch and even then it is debatable.

MoonSpaceMan9 07 June 2010 10:02 AM

Thanks for the reply , It's true you learn something everyday :P

The main thing was the RHF rack end as mine is a little bent I wanted to get it replaced for my upcoming MOT

I've change my clutch twice so far and I've not skimmed it either time hence why I through it would be a good idear to get a flywheel and get it skimmed ready for the 3rd time hehe

Tomwrx 07 June 2010 10:20 AM

what u been doin to it to need its clutch changed twice already??

ive done approx 40k and still on original,

NITO 07 June 2010 03:21 PM

You could go wild and fit the ultimate exhaust!!

http://www.pistonheads.co.uk/sales/1307040.htm

Nito


All times are GMT +1. The time now is 11:54 PM.


© 2024 MH Sub I, LLC dba Internet Brands