abs fault codes
hi all, does anyone have a list of the fault code for the abs on a my93..
i ask because ive done a fault check and its come up with 11,25,26,42. i think the 11 is the start code and 42 end code but what sensors are 25,26??? any help would be great peeps:thumb: |
hi just Google
subaru fault codes or flash codes this might help mark http://www.troublecodes.net/Subaru/ |
11 – Start Code, DTC is shown after start code, Only start code is shown in normal condition
Abnormal ABS sensor, open circuit or voltage too high 21 – front right ABS sensor 23 – front left ABS sensor 25 – rear right ABS sensor 27 – rear left ABS sensor Abnormal ABS sensor, abnormal ABS sensor signal 22 – front right ABS sensor 24 – front left ABS sensor 26 – rear right ABS sensor 28 – rear left ABS sensor 29 – any one of four Abnormal solenoid valve circuits in ABS control module and hydraulic unit 31 – Front right inlet valve 32 – Front right outlet valve 33 – Front left inlet valve 34 – Front left outlet valve 35 – Rear right inlet valve 36 – Rear right outlet valve 37 – Rear left inlet valve 38 – Rear left outlet valve 41 – Abnormal ABS control module 42 – Source voltage is abnormal 44 – A combination of AT control abnormal 51 – Abnormal valve relay 52 – Abnormal motor and/or motor relay 54 – Abnormal stop light switch 56 – Abnormal G sensor output voltage -------------------------------------------------------------------------------- |
All times are GMT +1. The time now is 03:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands