fliped my front mount
 

one of my uprgades before the next remap hopefully by jgm with some meth this time.

had to put in a new rad so decided to flip my intercooler at the same time

trial fitting to work out the pipework after i had fixed it into position
http://i533.photobucket.com/albums/e...J/f3231c0d.jpg

bumper fits ok
http://i533.photobucket.com/albums/e...J/e6b95c42.jpg

pipe work sorted drivers side (turbo out)
http://i533.photobucket.com/albums/e...J/0b11dce1.jpg

pipe work sorted pasanger side (intel in)
http://i533.photobucket.com/albums/e...J/e74a1038.jpg

fitted my new induction cone this one is about 3 times the size of my old one
http://i533.photobucket.com/albums/e...J/0f01e15a.jpg

next on the list is to change my inlet manifold, i've ported it a bit and have just finished flocking it. i'll be fitting early next week once i have my inlet manifold spacers

i'm by no means a mechanical expert but was actuall quite surprised how easy it was to do once you started chopping the pipes

:thumb: looking good , your flocking your inlet manifold . thats nuts

you have flocked your inlet manifold?

ah so i aint the only one that though he said that

yep flocked

http://i533.photobucket.com/albums/e...J/40f3530e.jpg

black with elec blue flec, i might burn it back yet hav'nt decided.

mad as a bucket of sticks:thumb: ftw

Hope you have a fire extinguisher at the ready... you'll be needing it!

Eight legged freaks! Looks like a tarantula:lol:

thats nuts mate, i love it lol

yes i have one lol would'nt even try it without the spacers

it's a test to see what happens, the flock never actually burns it just melts kind of like nylon, i actually like the melted down look hence toying with the idea of burning it back

Next you'l be flocking exhausts; alloy wheels & forget vinyl wraps its flocked body pannels!! Looks the nuts though! :)

Your kidding right?......:lol1::lol1:

no kidding

want to see how it lasts (it's ok i have a spare)

did'nt think much about it before until i talked to simon (jgm) about advice for my next re-map regarding porting my inlet and he said joking surprised your not flocking it :lol1: so i thought what the hell i'll see what happens

flocking awesome that.

Phil,,,,,,,,,,that looks likes a big spider:eek:

:lol::lol: If it does'nt catch fire ! it must smell pretty bad at near melting point lol

Sheer madness, but looks awesome:thumb:

I reckon a nice wallpapered throttle body will compliment that nicely..:lol1:

:lol: now that would burn, throttle body won't be getting done

at least i can safely say it's a first and as a major trend setter it will be one of a kind :D

with regards to flocking odd things i've just flocked a motorbike petrol tank for one of the lads at pennine subaru :eek: now that will look different

Mint Phil!

what did you paint your front mount with?

Mad, nice work

like what youve done with the induciton kit mate, howd u get that bend in there?

it's satin black :thumb:

the kit was made by scooby clinic before i had it, silicone bend from the topf of the car through to the inntewind and then the pipe also has a 45degree angle in it.

i know that, what brand of paint;) does it flake or chip easily?

it's acid etch primet and then cheapo no brand sating black, it's not too bad as far as chipping goes but is dead easy to touch up anyway.

must admit when i fliped it i turned it as well to the untouched side.

always do everything the same even my wheels as you can touch them up anytime.

cheers didn't think of etch primer it, sure ive got some in the shed.

I can't believe you have flocked your inlet manifold :lol1:
It looks good though :thumb:

lol, mad :)