Cisco ASA 5510
Anyone here do Cisco..?
We bought a Cisco ASA 5510 near 2 years back, however never got used, though some basic configuration was carried out. It was purchased with a ASA SSM-10 module also another feature to which we have lost the licence key to though it was installed on to the unit..The cost was near £5500. I have misplaced the blue console cable that comes with it, and have tried a different one but not able to connect. I have connected the ASA to the LAN, and am able to ping it, however not accessible via telnet or the web browser. If i recall right there was a peice of software required to access this.. Does anyone know what it is called? Thanks --Sam |
Just a guess, maybe only SSH was enabled instead of telnet so you'll need to use something like Putty to connect to it
|
I use Cisco but not Firewalls. But console port access should be the same as for a router anyhow. Youll need a rollover cable - you can pick one up off ebay just modify the pinout of an existing cable as per here:
http://www.cisco.com/application/pdf...ort-pinout.pdf Simon |
Also maybe these links will help for alternative access:
http://www.cisco.com/en/US/docs/secu...k.html#wp46243 http://www.cisco.com/en/US/products/...ides_list.html Cheers Simon |
SSH didnt work, we are still looking for the original cable...
|
i am presuming you set the baud, parity and stop bits correctly
also might be worth changing the flow control |
Good point hodgy. Also if you think your cable is the correct pinout then try it on another cisco just to be sure it and your connection works.
Simon |
The baud Rate is set correct, i think it may just be the cable..
|
I think you are after the Cisco ASDM-IDM Launcher?
|
All times are GMT +1. The time now is 07:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands