GEMS ECU problem - no power to ECU
 

We're in the final straight of rebuilding our Grp N Impreza GC8 rally car. There is a thread on projects about it.

Had a huge accident in the car 2 years ago - and have been reshelling it. All the main bits have been rebuilt and moved into the new shell. This includes all the wiring that has been lifted straight from the old shell into the new one.

The engine has been rebuilt and is now turning over well. However the ECU is getting no power to it, and as such the fuel pump isn't firing either.

Everything was working fine pre-accident. A standard Impreza ECU has also been fitted but that is getting no power either.

The earths have been checked - however no joy at the moment. Any idea? Is there anything obvious that may have been overlooked?

We're supposed to be out next Sunday 18th so any info would be appreciated. :thumb:

Ecu ground at back of inlet manifold, blown fuse in either fuse box

Speak to Steve simpson at TEG Sport Carneforth.
Link to Teg Sport; http://www.tegsport.co.uk/
Steve Simpson E-mail; simpson.msport@tiscali.co.uk
Steve fitted and maps my bugeye running a GEMS ECU. Where in Lincolnshire are you as I am in Coningsby and have done vehicle electrics on a variety of vehicles used in the military so may be able to help out.
Feel free to PM me rather than posting on this thread if you wish.