MY99 UK parts from broken car
Only the parts listed below and some small interior parts are left along with some misc items.
ImageShack® - bobred's Profile Page Front Black mudflaps/brackets x 2 with Silver Subaru swoosh - £15 delivered Petrol flap in RB5 Grey 86F - £10 delivered Parcel shelf and o/e Subaru speaker covers - £18 delivered Front and rear speakers - £10 a pair delivered Interior mirror - £6 delivered Prop - £20 delivered Wiper motor - £12 delivered Wiper arms with wipers - £15 pair delivered Air con pump Fully working - £30 delivered Space saver tyre [unused] - £20 delivered Brake servo - £22 delivered Brake fluid resevoir - £12 delivered Airbag control unit/ECU - £30 delivered Alternator - £17 delivered Ignition/Plug leads ex cond x 4 - £12 delivered Front and rear ARB's - standard - £10 ea + £7 del Plastic wiper/widscreen vent trim -£15 delivered Front window mechanisms n/s only - £14 delivered Central locking motor n/s only - £14 delivered Front/rear seat belts - £7 ea delivered Front/top inner arches - £15 pair Windscreen washer bottle/pump and hoses and spray nozzles - £15 delivered Front door seals [bottom] - £7 ea delivered Wheel nuts x 20 although 4 lockable nuts are slightly damaged due to hammering a socket on them. - £14 delivered A selection of dash switches - Headlight adjuster/rear demist/headlamp washer/- £5 ea delivered Plastic trims around doors/belts /air vents etc £? [main dash is sold] Jack - £12 delivered Subaru wheel/tool kit - £10 delivered. Radiator bottom hose -£5 delivered Airbox to inlet pipe - £10 delivered No part too small. lol Pick up will reduce the price. Thanks Bob |
Have you got the rear wheel arch rubber things (sry for discription) and what kind of condition are they in?
They run the lengh of the wheel arch and push onto the lip. |
TMIC if u still got ?
|
Originally Posted by R5_GTT_Steve
(Post 9332717)
Have you got the rear wheel arch rubber things (sry for discription) and what kind of condition are they in?
They run the lengh of the wheel arch and push onto the lip.
Originally Posted by Turbo_T
(Post 9332759)
TMIC if u still got ?
Btt |
btt
|
Bob - I'l have the Jack please...
Also, do you have the original hose/pipe which is needed to put my OE recirc valve back on? THe one which gets blanked off when fitting a VTA...mine was cut right back when the VTA was fitted and I want to stick the recirc back on. Cheers |
Originally Posted by nerocircus
(Post 9337120)
Bob - I'l have the Jack please...
Also, do you have the original hose/pipe which is needed to put my OE recirc valve back on? THe one which gets blanked off when fitting a VTA...mine was cut right back when the VTA was fitted and I want to stick the recirc back on. Cheers |
alright m8 my frunt speakers r broken where r u ? any where near notts
|
Do u have headlight adjuster switch and don't suppose u got wiring for it
|
Have you got the switch that turns the interior light on when door opens and loom? Both sides.
Also after the rubber grommets and tube that carry the wires for the doors (3door models) |
Originally Posted by stevecsti
(Post 9340073)
alright m8 my frunt speakers r broken where r u ? any where near notts
Originally Posted by porky_wrx
(Post 9340142)
Do u have headlight adjuster switch and don't suppose u got wiring for it
Originally Posted by mark_sargeant1985
(Post 9340172)
Have you got the switch that turns the interior light on when door opens and loom? Both sides.
Sold Also after the rubber grommets and tube that carry the wires for the doors (3door models) |
phase 2 440 injectors?
|
Originally Posted by zakscooby1
(Post 9343310)
phase 2 440 injectors?
|
btt
|
hi mate , have you got the carbon canister that goes by the abs pump , and a fuel cap >
|
Originally Posted by richgreenscooby1
(Post 9349928)
hi mate , have you got the carbon canister that goes by the abs pump , and a fuel cap >
|
btt
|
Cost for a front lambda sensor (if it's the one with the wiring that's about 10cm long!) please :)
|
Originally Posted by SiofChester
(Post 9351403)
Cost for a front lambda sensor (if it's the one with the wiring that's about 10cm long!) please :)
btt |
will the Alternator fit a early classic as my mate needs one
cheers |
Will the rear drive shaft fit my00 uk also rear diff if you still have and if it fits
cheers |
hi, have u got the master cylinder for the clutch, and the bit that goes through the car that attaches to the pedal. thanks steve
|
Hi,
Can you help me out with a few parts I'm after - 1. Fuel sender, no pump required for a P1. Blue label 2. Plastic air / brake ducts that sits directly behind the 2 lower slots of front classic facelift bumper. These attach to part of the underneath plastic panels, the ones between inner arch panel and bumper. It also has a fixing point on the bumper itself I think? I don't mean the wedges but the ducts , I think they direct air towards the brakes. I only need the passenger side. 3. The actual underside plastic panel, the one that runs under engine bay next to the removeable undertray. The one that the air duct fixes to as I tried to explain above, passenger side. 4. The grommits/ fixings for these bits. If you have any of the parts could you PM a price Many Thanks |
Also, would you be interested in parting with the interior carpet? If so what colour is it and how much...
Thanks SS |
Originally Posted by Turbo_T
(Post 9353941)
will the Alternator fit a early classic as my mate needs one
cheers
Originally Posted by scooby1doo1
(Post 9354008)
Will the rear drive shaft fit my00 uk also rear diff if you still have and if it fits
cheers
Originally Posted by sharpy10
(Post 9354059)
hi, have u got the master cylinder for the clutch, and the bit that goes through the car that attaches to the pedal. thanks steve
|
Originally Posted by LongJonnyGspot
(Post 9354241)
Hi,
Can you help me out with a few parts I'm after - 1. Fuel sender, no pump required for a P1. Blue label 2. Plastic air / brake ducts that sits directly behind the 2 lower slots of front classic facelift bumper. These attach to part of the underneath plastic panels, the ones between inner arch panel and bumper. It also has a fixing point on the bumper itself I think? I don't mean the wedges but the ducts , I think they direct air towards the brakes. I only need the passenger side. 3. The actual underside plastic panel, the one that runs under engine bay next to the removeable undertray. The one that the air duct fixes to as I tried to explain above, passenger side. 4. The grommits/ fixings for these bits. If you have any of the parts could you PM a price Many Thanks
Originally Posted by Captain Carbon
(Post 9354733)
Also, would you be interested in parting with the interior carpet? If so what colour is it and how much...
Thanks SS |
I will have both drive shafts please
Cheers |
theplastic inner arch covers, i iwll have them mate ,by any chance have you got the switch blank - the bigger one that is on the centre console by the handbrake and ill have the switches aswell please
steve pm me your paypal address and i`ll pay up |
Originally Posted by scooby1doo1
(Post 9356347)
I will have both drive shafts please
Cheers
Originally Posted by stedee
(Post 9357665)
theplastic inner arch covers, i iwll have them mate ,by any chance have you got the switch blank - the bigger one that is on the centre console by the handbrake and ill have the switches aswell please
steve pm me your paypal address and i`ll pay up |
Hi have you got the radiator?
Cheers |
All times are GMT +1. The time now is 12:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands