ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Passenger Windows don't work. (https://www.scoobynet.com/general-technical-10/818875-passenger-windows-dont-work.html)

Beastra 27 February 2010 06:57 PM

Passenger Windows don't work.
 
I broke my passenger side front window switch a while back and the rear switch has been missing for a while as well.

Replaced all my door cards today with new ones that have working switches all round but both passenger side windows will not go up or down via their individual switches or by the switch on the drivers door.

Now, when you press the switches you can hear the motor trying to do something and approx every 10 seconds you can hear a clicking noise from around the drivers seat area. Sounds like a relay click.

Can anyone advise what might be causing passenger side windows to not work.

Many thanks.

Beastra 28 February 2010 01:35 PM

Found a couple of fuse layouts but cannot see a fuse relating to the electric windows.

Strange how both passenger windows will not work.

Beastra 01 March 2010 06:58 AM

Bump...

Beastra 06 March 2010 08:47 AM

Now it seems only the drivers window works.................

alcazar 06 March 2010 10:56 AM

OK, this may be a silly question, but on mine there is a button which LOCKS all the other windows. You haven't got that depressed, have you? Or the wires crossed somehow?

Beastra 07 March 2010 08:31 AM

No the lock button is off and you can only fit the plugs one way into the switches.

cdm1 07 March 2010 09:48 AM

Are the switchs from the same year car as yours? as they changed the wiring from early classic to late classic also take off the switchs and make sure that none of the pins have bent over

carl heath 07 March 2010 10:41 AM

thats what was thinking,i changed a door on newish golf at work this week and could not get window to work, as it turned out it was one of pins bent and stopped the plug connecting proper,have you put a voltmeter on it to see if power is there ?

Beastra 07 March 2010 01:56 PM

The door cards and switches are from a V2 STI, mine is a MY97 T2000.

Didn't realise the wiring was different, even though the switches are still from a pre-facelift classic. Will get some new switches and see what happens.

Thanks :thumb:


All times are GMT +1. The time now is 02:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands