where to buy Slip joint exhaust clamps?
 

I have a slip joint exhaust that seems to blow no matter what I do, I have found what looks like a good 3inch clamp on the bellow link but can only find them in the USA and they are 12USD each with 95USD postage :eek:

Does anyone know any sellers in the UK or any alternatives? Any help appreciated.

Stainless SealClamp 3" Pre-Formed

Not the same type of clamp, but have you tried something like this:
NORMA - STAINLESS PIPE CLAMP (79-85MM) - GBS-82/25

That shipping is excessive. I have frequently had stuff from the US. Try calling them and ask about shipping by US Mail. That should be lots cheaper.

i just used a mikalor clamp thats commonly used on intercooler pipes!!!

was running 3" slip jointed too with anti lag and had no problems.

:thumb:

Thanks for the replys I will give them a go a see. I Have them same style at the minute but they dont look as well made or as strong.

Smear 3 bond on joint when putting it together.
The clamp should be no wider than the slit on the joint.
I've got a 3" revolution systems and the supplied clamps were pretty useless leak-wise. Mikalor types have been better.