Parts left over from project.
These are all the bits i dint need most new.
Assortment of i/c pipes mostly 70mm stuff,from perrin newage fmic kit,some 90degree bends some 45's,2 lengths of teflon braided fuel pipe about 400-500mm each,offer on the lot or let me know if there is anything you want. http://i171.photobucket.com/albums/u...0220101581.jpg New samco power steering pipe kit not sure if its newage or classic,offers needs a clean. http://i171.photobucket.com/albums/u...0220101584.jpg Top and bottom newage rad pipes,offers. http://i171.photobucket.com/albums/u...0220101583.jpg Sytec motorsport fuel filter with red anodised alloy bracket,offers. also a fancy alloy fuel pressure reg mounting bracket sytec,this did not fit my sx pro reg,offers, http://i171.photobucket.com/albums/u...0220101585.jpg Assortment of autobahn t-bolt i/c pipe clamps SOLD New turbosmart dumpvalve/pipe blanking alloy bungs,i have x3 all ranging from iirc 30 - 36 mm will check. http://i171.photobucket.com/albums/u...0120101543.jpg Under bonnet carpet from sti 7. http://i171.photobucket.com/albums/u...0120101538.jpg |
Interested in the alloy pipes and red intercooler pipes, also fuel filter, could you give me a guide price?
Mark |
£50 delivered.
|
How much for the braided hoses. Ta
|
Originally Posted by erchie84
(Post 9231593)
How much for the braided hoses. Ta
|
Tops thanks will keep my eye on it
Thank you |
I will Have the ally bends if u want to split
|
guide price for the power steering pipes please mate?
|
£25 + del for the pas pipes.
|
Milzy if mark a or no other interest in a couple of days you have 1st dibs ill sell you just the alloy bends cheapo.
|
parts
hardy you need to clear in box :thumb:
|
parts
YHPM regarding parts:thumb:
|
Originally Posted by H4RDY-P1
(Post 9231669)
£25 + del for the pas pipes.
|
Inbox cleared.
As said i really am not sure what model the pas pipes are for,ill look on them for a part number soon as i get home. |
didnt this lot sell
to a member on sheffield scooby's ???? as i ask about the clips in your last thread |
The guy changed his mind as he sold his car.
|
Part number on the samco pas pipes is 1290.
|
Milzy do you want just the 4 x small alloy bends or the 4 x plus the longer perrin alloy pipe too ?.
|
Originally Posted by phil739
(Post 9232197)
didnt this lot sell
to a member on sheffield scooby's ???? as i ask about the clips in your last thread |
Price for Mikalor clamps as a job lot please.
|
The clamps are not all mikalor only 1 the rest are autobhan,£13 delivered for the lot.
|
bttt.
|
T-Bolt clamps sold.
|
i did but to late ...lol
|
sorry phil ,dint think you was interested now !!!!.
|
All times are GMT +1. The time now is 05:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands