***Breaking good spec classic. Apexi Power FC, AVC-R, Cusco, Brembo's, HKS, H&S, ***
Right, I bought this car a little over a fortnight ago, after a 700 mile trek, knowing that it had a head gasket problem.
After hearing it running, I repaired the problem and looked forward to having some fun with the car, which I did, for a short while. However after a week the bottom end has started to grumble. :( I can no longer justify spending any more money on it, so I have decide to break it. The car was a great little rocket with excellent power delivery and awesome braking ability. It had been mapped by Andy Forrest, and I was extremely surprised how quick it was for the level of spec. I can only put this down to the quality of all the various components and of course AF's mapping. Here are a few pics of various parts on the car... Firstly, the car :( http://i41.photobucket.com/albums/e2...%20BPM/010.jpg Parts 16" wheels and worn sticky Yoko tyres (ideal track day jobbies) £100.00 http://i41.photobucket.com/albums/e2...%20BPM/011.jpg Autobahn 88 FMIC £160.00 Pre facelift front bumper, cut out for FMIC, in 406 silver. £80.00 http://i41.photobucket.com/albums/e2...%20BPM/009.jpg STi RA version 2 cylinder heads, recently skimmed and pressure tested in excellent condition. These are the under bucket shim, solid lifters type and love to rev. £200.00 550cc PH 2 injectors (SARDs) £260.00 PH 2 to PH 1 adapters £30.00 Fuel pressure regulator c/w adapter £55.00 http://i41.photobucket.com/albums/e2...%20BPM/008.jpg Apexi induction kit £65.00 http://i41.photobucket.com/albums/e2...%20BPM/007.jpg Proffesionally ported and wrapped headers/up pipe. I have had these off the car recently, and a really good job has been done £80.00 PH 1 Inlet manifold insulating spacers, 10mm. £30.00 TD05 16G, ported by Andy Forrest in excellent condition. £200.00 Forge dump valve to fit FMIC pipework £40.00 Maf sensor £60.00 Brake master cylinder stopper SOLD Front strut brace £35.00 http://i41.photobucket.com/albums/e2...%20BPM/043.jpg Rear strut brace £35.00 http://i41.photobucket.com/albums/e2...%20BPM/012.jpg Cusco Rear Anti roll bar, adjustable £70.00 http://i41.photobucket.com/albums/e2...%20BPM/034.jpg Hayward and Scott hi flow cat down pipe, wrapped. This is the 3" version, and is listed on their site at £611.00 new, passes the MOT £300.00 Parts still available.. Centre console storage £25.00 http://i41.photobucket.com/albums/e2...0BPM/014-1.jpg Mint plastic header tank £25.00 http://i41.photobucket.com/albums/e2...%20BPM/042.jpg Rear bumper O/S/R Door N/S/R Door N/S/F Door Front wings Headlights Anything you are interested on, but not listed please contact me via either PM, or email at neilrobinson05@aol.com |
Where are you mate. how much for apexi ecu. is it 3 or 4 plug. cheers.
|
Over £3000 in bits... obviously worth a LOT MORE broken than it was as a car considering what Cal sold it for.
Told him he should have broken it if he didn't have the inclination to fix it. I sold Cal that HKS Hyper system for £240 about 8 months ago, I'd be happy to buy it back............... but not at £300 :( £255 shipped any good? |
i am interested in the 16" wheels and the AVC-R.
Do you ship to Germany? Can pay with paypal and i know that the shipping-costs are not so cheap... |
hi, where are you from?
is the turbo front entry? thanks |
avcr plz how do you want paying ? or where you based ill collect pm me plz
|
Originally Posted by f4la k
(Post 9168247)
Where are you mate. how much for apexi ecu. is it 3 or 4 plug. cheers.
It is for a version 1 & 2 car.
Originally Posted by WUZ
(Post 9168254)
Over £3000 in bits... obviously worth a LOT MORE broken than it was as a car considering what Cal sold it for.
Told him he should have broken it if he didn't have the inclination to fix it. I sold Cal that HKS Hyper system for £240 about 8 months ago, I'd be happy to buy it back............... but not at £300 :( £255 shipped any good? FYI, the car now stands me at a lot more than what I paid Cal for it...
Originally Posted by drischnie
(Post 9168299)
i am interested in the 16" wheels and the AVC-R.
Do you ship to Germany? Can pay with paypal and i know that the shipping-costs are not so cheap... |
Originally Posted by Sabas
(Post 9168329)
hi, where are you from?
is the turbo front entry? thanks
Originally Posted by band_wagon
(Post 9168335)
avcr plz how do you want paying ? or where you based ill collect pm me plz
For anyone looking by the way, I do not accept paypal. Only bank transfers, cash on collection, or cheques. PM's replied. Neil. :) |
would u take 80 delivered 4 the reverse vent? If yes detail via pm 4 bank transfer.
|
PM's replied to. :)
|
Looking @ the whole car m8... How much???? minus engine
|
Very interested in the 17" wheels, I am local too so can collect :thumb:
What model of Falken tyres are they, how much tread do they have and are all the wheels in good condition like the one pictured? |
Originally Posted by phil84
(Post 9170074)
Looking @ the whole car m8... How much???? minus engine
Originally Posted by Rich D
(Post 9170187)
Very interested in the 17" wheels, I am local too so can collect :thumb:
What model of Falken tyres are they, how much tread do they have and are all the wheels in good condition like the one pictured? They all have at least 5mm of tread, and the wheels are very clean with no kerbing or rough paint. Neil. |
hi are the prices deliverd ?
intrested in the avcr and or apexi fc etc |
Originally Posted by b3mwe
(Post 9170219)
hi are the prices deliverd ?
intrested in the avcr and or apexi fc etc |
Originally Posted by E_M_B
(Post 9170208)
The tyres are Falken ZIEZ ZE912.
They all have at least 5mm of tread, and the wheels are very clean with no kerbing or rough paint. I definately want them and will be able to get them this weekend or maybe Friday afternoon |
have you got parallel fuel rails?
|
neil text me payment details 07807526209,Cheers
|
i willl pay the £200 for the 17inch alloys and pick up asap!!!
|
Originally Posted by Rich D
(Post 9170334)
thanks for the prompt reply, would you accept £190 cash collected?
I definately want them and will be able to get them this weekend or maybe Friday afternoon YHPM. :)
Originally Posted by zakscooby1
(Post 9170389)
have you got parallel fuel rails?
Originally Posted by rudi93
(Post 9170460)
neil text me payment details 07807526209,Cheers
|
Originally Posted by bobtheboss78
(Post 9170467)
i willl pay the £200 for the 17inch alloys and pick up asap!!!
|
|
Originally Posted by stevemoir
(Post 9170823)
Neil. |
hi mate is that 200 delivered would you take 185 delivered also im at work at the mo and due to the comps im unable to view pics i will have a look tonight is the avcr in good cond i.e scratches/scrapes (1st refusal)
steve |
Steve, yhpm. :)
|
pm replied to
steve |
hi mate thats the dosh trans you need to clear your inbox and pm for delivery details
steve |
You still got the bonnet vent?
I offer £60 as they are only 95 quid new. cheers |
Hi mate have you still got the hks exhaust system pm me if have?
|
Neil, your inbox is full so I can't reply to your PM
but I'll be over for the wheels tomorrow afternoon, probably be around 4pm :thumb: |
All times are GMT +1. The time now is 06:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands