Does Hawkeye STI have decat up pipe as standard?
Hi all,
Basically as per the title "Does Hawkeye STI have decat up pipe?". If it does I'm thinkin of gettin a decat one put installed (amongst other things) before gettin it re-mapped. It's been PPP'd - but I don't think the up-pipe is changed as part of the package. Sorry if its a dumb question but I'm no expert :confused: Thx in advance |
Hawkeye STI does indeed have a de-catted uppipe
|
Originally Posted by RonnieB
(Post 9162780)
Hi all,
Basically as per the title "Does Hawkeye STI have decat up pipe?". If it does I'm thinkin of gettin a decat one put installed (amongst other things) before gettin it re-mapped. It's been PPP'd - but I don't think the up-pipe is changed as part of the package. Sorry if its a dumb question but I'm no expert :confused: Thx in advance Tony |
The hawkeye STi DOESNT have a sports cat downpipe. Only found on the 02-05 STi PPP.
|
Originally Posted by rob84
(Post 9162842)
Hawkeye STI does indeed have a de-catted uppipe
|
as an aside the hawkeye wrx doesnt have a cat in the up-pipe either.
|
Originally Posted by Butty
(Post 9162975)
The hawkeye STi DOESNT have a sports cat downpipe. Only found on the 02-05 STi PPP.
|
Thx for the replies gents.
Was just wondering what upgrade (if any) to go for next. Cars gettin re-mapped in a couple of weeks (currently PPP'd, so officially 316bhp, but who knows really). Already done so far: CAI kit (being installed before re-map) Upgraded plugs PPP sports cat/decat down pipe uprated fuel pump Whiteline anti-roll bar Tein springs (lowered) Uprated discs, pads, s/steel hoses Any suggestions - ideally to increase BHP, but handling suggestions welcome too. Without going into £1,000's? Cheers |
Only handling suggestion is roll centre adjuster kit.
Power wise - just need the remap as you have all the bits ready ... happy days :thumb: |
Originally Posted by dynamix
(Post 9163423)
Only handling suggestion is roll centre adjuster kit.
Power wise - just need the remap as you have all the bits ready ... happy days :thumb: |
It depends on what your mapper can get from it tbh. It will make what it makes to a large degree but probably around 350 (give or take a bit) and high 300's maybe 400 lb/ft torque.
Who is mapping it? |
Scoobyclinic, good news I hope?
|
Pat is very good :thumb:
|
How about a cold air feed for the CAIK.
3 port boost solenoid maybe?! (£60) |
Slightly different topic - are anti lift kits any good?
|
All times are GMT +1. The time now is 03:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands