My new mods
Finally got round to playing with the lights on the scoob.
Firstly, I only got one reverse light as I replaced the offside bulb for a foglight, so decided to go back to having 2 reverse lights again AND have foglights in there too! I bought a batch of 10mm Ultrabright red LEDs and after a bit of experiment with an old light cluster I had, here's the result: http://i100.photobucket.com/albums/m...g?t=1261590751 Only done one side today, will finish it off tomorrow Secondly Just to make the scoob a little different, I removed the front indicators completely and put the bulbs into the sidelights, then fitted 10mm warm white LED's in there as well. Indicators removed: http://i100.photobucket.com/albums/m...hoto0354-1.jpg Just need to do a little trimming to tidy the bumper up. New LED sidelights: http://i100.photobucket.com/albums/m.../Photo0350.jpg http://i100.photobucket.com/albums/m.../Photo0352.jpg Indicators: http://i100.photobucket.com/albums/m.../Photo0348.jpg The LED's are a bit to bright as they drown out the indicators but it's a simple fix, I put 5 LED's in each unit so will have to take 1 or 2 out. When I get time, I'll do a fitting guide on my website. |
nice paul.
twin reversing lamps are the way backwards ;) |
that looks cool mate:)
|
Originally Posted by WRX_Dazza
(Post 9115023)
nice paul.
twin reversing lamps are the way backwards ;) Thanks guys, been playing around with LED's for a project at work and thought I'd give it a try! I really fancied doing something with the scoob to make it look a little different and with the indicators gone, it's subtle and hope it gives the front end a little bit of an aggressive look. Was thinking about the Audi R8 style, but thought it may look a bit naff |
Paul ,
you've got the same number plate as me !!! well not exactly the same obviously, but same letters !! :) |
Nice one Paul.:thumb:
What's the plan with the old indicator apertures? You need to change your avatar now.:D |
Originally Posted by BRI4N
(Post 9116019)
Nice one Paul.:thumb:
What's the plan with the old indicator apertures? You need to change your avatar now.:D Most probably brake ducting mate, just had a look in the daylight and it definately needs the light brackets tidying up! for the time being, I'll paint the satin black. |
:thumb:
|
looking good mate :thumb:
|
All times are GMT +1. The time now is 05:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands