ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   where to get a good remap??? (https://www.scoobynet.com/general-technical-10/806064-where-to-get-a-good-remap.html)

richard1522 20 December 2009 04:53 PM

where to get a good remap???
 
Hi thanks for looking,
I have a blob eye wrx currently running at 240bhp and looking to remap with a fmic fittted as well can any one tell me where to have the work done near gloucester please thank you

mcvicar 20 December 2009 05:12 PM


Originally Posted by richard1522 (Post 9109951)
Hi thanks for looking,
I have a blob eye wrx currently running at 240bhp and looking to remap with a fmic fittted as well can any one tell me where to have the work done near gloucester please thank you

Simon (JGM) is your man. He travels all over the place working his magic. He knows his stuff mate and you won't go wrong with him. I have had maps done by him and so have many other with great results.:thumb:
You can get his contact details at www.jollygreenmonster.co.uk

richard1522 20 December 2009 07:01 PM

Thank you, I will do and give him a call tomorrow.

Jolly Green Monster 20 December 2009 08:43 PM

On wrx you would do better to keep the tmic rather than front mount whilst still on the standard turbo :)
Walbro pump, decat, 3port, remap

richard1522 20 December 2009 11:04 PM


Originally Posted by Jolly Green Monster (Post 9110372)
On wrx you would do better to keep the tmic rather than front mount whilst still on the standard turbo :)
Walbro pump, decat, 3port, remap

I've got your number and give you a buzz tomorrow about prices and work involved. thank you

Jolly Green Monster 21 December 2009 10:26 AM

no problem

richard1522 23 December 2009 07:49 PM

Thanks for the advice simon. what was the name of the garage we chatted about mate i forgot the name and need to see it i can book it in at some point. thanks

carpboy 23 December 2009 08:09 PM

Another vote for Simon. I hope he will map my stroker when i put it together. Hade him map mine 3 times so far:thumb:

richard1522 23 December 2009 08:35 PM


Originally Posted by carpboy (Post 9115276)
Another vote for Simon. I hope he will map my stroker when i put it together. Hade him map mine 3 times so far:thumb:

Nice!!! I've just started thinking about more power as i'm a bit bored with the 240 bhp i have at the moment. With hardly any money and a bit of help from ebay and a lot more from simon i can start getting in the 350 range. Hopefully any way. So combing the sites at the mo in search of injecters and turbos lol

Jolly Green Monster 23 December 2009 08:51 PM


Originally Posted by richard1522 (Post 9115236)
Thanks for the advice simon. what was the name of the garage we chatted about mate i forgot the name and need to see it i can book it in at some point. thanks

No problem
Subaru4you, Subaru Performance Specialists, Upgrades & Subaru Servicing

Simon

Scooby_Stu_ 24 December 2009 09:36 AM

Simon JGM :notworthy :notworthy :notworthy

richard1522 24 December 2009 03:46 PM

would it be sensible to start thinking of upgrading the brakes after the work is done? are the sti brembro's a direct replacement??

TonyBurns 24 December 2009 04:07 PM

You can fit the brembo's but unless you have STI alloys then they wont fit behind the ones you have on, so thats the cost of a new set of wheels also, where as if you look in the group buy section then you will see buys on some K sport or godspeed brakes that will fit behind your wheels ;) and for not much more than a worn set of brembo's will cost you ;)

Tony:)

TonyBurns 24 December 2009 04:12 PM

https://www.scoobynet.com/group-buys...kit-799-a.html

richard1522 24 December 2009 04:29 PM


Originally Posted by TonyBurns (Post 9116480)

WOWZERS!!! they seem to be what i require... The prices you have quoted of £799 is that right as the webpage states £1249?? Will these go straight on under my 17x45x215 wheels or will i need bigger wheels??

TonyBurns 24 December 2009 05:02 PM

The 699 ones are 330mm which will fit under your 17 inch wheels with no issues ;)

Tony:)

richard1522 24 December 2009 05:23 PM


Originally Posted by TonyBurns (Post 9116567)
The 699 ones are 330mm which will fit under your 17 inch wheels with no issues ;)

Tony:)

nice!! thank you. I was looking at the sti brembos and they are going for about £500 an axel so liking that price of £699 and a bigger brake.:luxhello:

a16pse 24 December 2009 06:26 PM

JGM simon is a top bloke awsome at his job mapped my 06 STI highly recomend him, i would also recomend duncan from DYNAMAX onother top guy , they will both be very helpfull and put you in the right direction, cheers steve.

richard1522 24 December 2009 06:52 PM


Originally Posted by a16pse (Post 9116677)
JGM simon is a top bloke awsome at his job mapped my 06 STI highly recomend him, i would also recomend duncan from DYNAMAX onother top guy , they will both be very helpfull and put you in the right direction, cheers steve.

thank you.
I spoke to JGM and also dropped a mail to duncan about a package he has on his webpage which is half the price i've been quoted so want to make sure its the same and why the big difference in price.


All times are GMT +1. The time now is 01:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands