fitting boost gauge on a bugeye ej20
I would like to fit a boost gauge on my bugeye, can someone point me in the right direction to which hose I need to T into, there are so many and I guess some are filled with water not air :lol1:.
Any help inc photos if possible would be good. Thanks in advance |
1 Attachment(s)
if you follow the blue 4mm boost hose around with the throttle cable you will see where it is Joined onto the inlet manifold
Attachment 53561 |
a good easy to follow thread.oh and that engine bay begs for some dirt sprayed on to it lol!!!!!!!!!! lovely motor brockalightus.
|
Originally Posted by milliemoo
(Post 9074955)
a good easy to follow thread.oh and that engine bay begs for some dirt sprayed on to it lol!!!!!!!!!! lovely motor brockalightus.
|
does look quite nice. :thumb:
dan |
Originally Posted by brockalightus
(Post 9074237)
if you follow the blue 4mm boost hose around with the throttle cable you will see where it is Joined onto the inlet manifold
http://i663.photobucket.com/albums/u...ofitted036.jpg |
i have given you the information you need. its up 2 you how you use it pal....
|
I second brockalightus, T'ed into the pipe coming off the manifold
https://www.scoobynet.com/picture.ph...pictureid=6196 |
thank-u sir..........
|
ill third brockalightus. thats how i have done it. :thumb:
|
you could also tap into the vaccum pipe coming off of the dump valve. :thumb:
|
1 Attachment(s)
Originally Posted by HT04
(Post 9078215)
you could also tap into the vaccum pipe coming off of the dump valve. :thumb:
Yep Attachment 53562 |
Originally Posted by HT04
(Post 9078178)
ill third brockalightus. thats how i have done it. :thumb:
Steve |
Originally Posted by Stevesbluewrx
(Post 9081240)
+4 best place for it if you ask me.
Steve |
All times are GMT +1. The time now is 01:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands