How much Hyperwash?
 

Hi all,

Taken delivery of an HD foam lance kit from PB. Used it once and seems really good, but how much hyperwash do you guys put in the litre bottle?. It says a dillusion rate of 400:1, which means on pumped squirt to over a bucket load of water, meaning you need a really small amount for the litre bottle. I am thinking of just using one pumped squirt in the bottle, but is that too much?.
Sorry for the silly qustion, but want to get it right :thumb:

From PB site: Directions for use: Remove the injector head and pour or pump approximately 100 ml of Meguiars Hyper Wash into the bottom of the 1 L foam lance bottle, then fill the bottle to the top with hot water. Then refit the injector head and shake the bottle gently to mix the solution before finally attaching it to your pressure washer - then fire the washer up, and adjust the top dial on the injector head until you get the desired foam thickness.

Hope that helps :)

lol, thanks mate. Just like me not to read the instructions first!:lol1:

No bother, had just read the site as I had just bought my kit and wondered same thing :)

Same here. Thanks Lucky for posting this mate as I am using mine tomorrow for the first time.

How did you find Megs Hyper Wash etc?

Steve

Hi mate,

Yeah, its good stuff. More fun than anything, seems weird coveering the car in foam!. Joking aside, it did remove loads of dirt making washing it easier. I used 100ml and it seemed plenty.

Steve