No, mine's an LCD but VFD was an extra cost (quite a lot, actually!) option.
It was bought and installed in June '04

JohnD

The VFD was meant to supercede the LCD version completely...........The LCD display completely disapears on mine in hot weather despite fiddling with the contrast. :(

Shaun

yeah i have the same probs with the LCD - i was wondering could you maybe change the screen filter to that of a blue one, or better still wire in a VFD display.

but still first job is trying to get the latest software on to it. i dropped Ecutek an email as they took over it after PSI3 disappeared, so fingers crossed :)

Looking for help with and ECUTEK EGV4 advanced vehicle ECU data monitor when i plug it in it just comes up with

Please Wait.......................

TRY 9600

then
TRY 19200

i have a 2003 blobeye as was told it came out of this model i have tried it on a bug to but the same thing comes up, does this mean its knackered would rather find out rather than get my money back if its workable

cheers in advance

john

Pic of screen as it is

Attachment 65425

https://www.scoobynet.com/private-fo...i-sensors.html

Have a look towards the end of this thread.....someone has a copy of the manuals.

Shaun

Cheers sent mail

jon

I have manuals, pm me your email address, although I don't think it would help as it sounds firmware related.

Tried everything spoke to a guy who said its down to PSi3.co.uk but i cant find a number or contact for them does any1 know

cheers

They went bust a few years back, so there won't be any support now.

Hi mate if you have aftermarket ECU(Simtek,Motec,Gems etc.)PSi3 doesn't work with aftermarket ECU.

its a subaru ECU spec c jdm
now been told it could be a firmware issue and no 1 has taken it up since simon quit the business
so yes no support or help from the original manufacturers

Other option is ther any techi bods who know the system to help reboot or check firmware or was it PSi3 only who sorted things out, this is the last thing to ask before i get my money back

It is an ECUtek model PSi3. So as someone suggested, get in contact with them.

Another option is to try it on a standard car. Maybe your car had an aftermarket ECU you didn't know about?

I've found that there is no too much knowledge on the ins and outs of the PSi3's, you'll find out if you look at some older posts. Most of them were handled by Simon@PSi3 privately.

I have PSi3 Ecu monitor which i brought and working like charm,but before i try other model which is similar to your(VFD) and this don't work on my JDM WRX.

I have a PSI3 working fine on a JDM Bugeye sti

Which one? VFD or just LCD?

just LCD, but it works lol

It's same i have and this working like charm,without probelm,but VFD with new FW don't work on my JDM WRX

No its def a subaru ecu with an ecutek remap and although it is the ecutek psi3 monitor ecutek have nothing to do with the firmware or issues arising if its not working that still goes to PSi3 the manufacturer, yes i have tried it on a uk bugeye WRX with the same message coming up on hi car, conclusion now being its def a issue relating to firmware as i dont know any1 local who has a STi v8 to try it on.

as there are only 3 wires are they all connected ok at the PSI3?

Try normal PSi3(LCD version),if working on your JDM Spec C

yes i rewired it so fresh contacts at all the pins

Simon does have an e-mail address and has helped out people in the past...........I'll dig it out :D

Shaun

Have a look at these threads........might be an e-mail contact for simon :)

https://www.scoobynet.com/scoobynet-...-monitors.html

https://www.scoobynet.com/dealer-and...n-at-psi3.html

CarlXLNT might be able to help as well :)

Shaun