NGK pfr7b
Hi had my car 2004 sti remapped a few months ago and was advised to up grade my plugs to these so my plan is while i do my 6 monthly oil change i was going to give it a ago to change my plugs just wanted to know how hard is it to change the plugs and what gap do i need to set the plugs 2 cheers for any info on this
jason :thumb: |
There's a group buy on at the moment for PFR7b. You may get in if you're quick!
Set to 0.65mm Changing the plugs is not hard but is more involved than the average engine! You need to remove the air cleaner (2 bolts) and the washer bottle on the other side (suck the contents out first) Unbolt the coil packs and remove. The plugs are deep in the cam covers so you will need an extension on the plug socket (may need to experiment with the length) Sounds a bit of a job, but thinking about it is worse than actually doing it! JohnD |
do you want som bkr7eix plugs?
yours for £25 delivered,same as pfr7b's but iridium. pm me .. |
Originally Posted by JohnD
(Post 8832864)
There's a group buy on at the moment for PFR7b. You may get in if you're quick!
Set to 0.65mm Changing the plugs is not hard but is more involved than the average engine! You need to remove the air cleaner (2 bolts) and the washer bottle on the other side (suck the contents out first) Unbolt the coil packs and remove. The plugs are deep in the cam covers so you will need an extension on the plug socket (may need to experiment with the length) Sounds a bit of a job, but thinking about it is worse than actually doing it! JohnD |
Originally Posted by gc8-r
(Post 8833120)
do you want som bkr7eix plugs?
yours for £25 delivered,same as pfr7b's but iridium. pm me .. |
Originally Posted by jason and his scooby do
(Post 8833956)
Cheers mate doesnt seem to bad lol famous last words i think i shall give it ago :thumb:
JohnD |
All times are GMT +1. The time now is 08:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands