heater controls
 

i've got a pre-facelift impreza and am trying to fit 3 52mm gauges.the 3 cut out's for the heater controls look like a good spot.i've already measured up some 95/96 legacy controls and they will fit nicely in the centre console above the head unit what i'm after finding out is the wiring the same and just need's extending as the early impreza is based on the legacy,must add i'm not a wiring buff.any help much apreiciated,
mik.

Not sure if this is going to help but I have just fitted this into my 95 impreza not sure if it will fit in your car.

http://i703.photobucket.com/albums/w...g?t=1244927382


I bought this replacement cover from milsport.co.uk







Milsport logo - 92-96 classic Impreza - Interior£70.50 eachhttp://www.milsport.co.uk/jump_images/45_1.jpg Central gauge binnacleCode: MGP 01Model: 92-96 classic ImprezaType: InteriorAT LAST, THIS IS WHAT YOU HAVE ALL BEEN WAITING FOR!! A central guage pod for the pre-facelift 92>96 classic JDM (import)Impreza. This item replaces the whole central heater control/vents panel with a panel that is designed to accept 3 x 52mm guages (60mm will not fit) or as I have done a combination of boost controller/power meter/turbo timer etc. The recess for guages etc is set back with an overhang over the aperture to help lessen glare . The possibilities are endless the only thing holding you back is your imagination. PLEASE NOTE. The example shown has been colour coded. The product comes in a black, fine grain effect finish to match the standard interior plastics. The pod willbe delivered to you WITHOUT any holes cut for gauges, this is because you can you use the pod in so many ways. If you want the holes (3 x 52mm only) pre cutting then please see the option feature below.

look's nice but i didn't want to loose the centre vent's.i think i'll just get the legacy one and give it a try.cheers,
mik.