330mm brake kit with AP 4 pot calipers £895
Hi
I am offering a complete brake kit including 330mm x 28mm grooved 2 piece discs and bells , AP CP6600 4 pot calipers , alloy mounting brackets and Ferodo DS2500 pads for £895 including free delivery . The calipers I have are all black , but for no additional cost , we can spray them any colour you want. Anyong wanting to fit braided hoses , I can supply the Hel stainless steel braided hose kits for £52.50 , and a litre of Dot 5.1 fluid for £9.50 when purchasing one of these kit. They will fit under all Subaru standard fit 17" wheels except the early classic speedline wheels , and will fit under just about every after market 17" wheels , All our discs come with a 12 month guarantee against warping even if you do track days. AP calipers are known as being the best in the business , along with the Fantastic Ferodo pads and our fully guaranteed discs , can it get any better at this price :) There are no limited numbers , payment can be made by paypal , bank transfer or cheque , I can be contacted on 01656 723060 or ian@godspeedbrakes.co.uk Cheers Ian |
Ian
Any Pics ? |
Here is a pic of our kit but with AP 6 pots
http://img.photobucket.com/albums/v3...Picture149.jpg but the kits will be with these 4 pots http://img.photobucket.com/albums/v1...kes/cp6600.jpg Cheers Ian |
Ian
How much for the 6 pots, I know thet are not available as a discounted GB. PM me if you wish, I was about to splash out on some k-sport 8 pots but would rather the AP 6 pots. I am going to buy some either way by Wednesday. Andy |
What's the biggest size disc that'll fit under 18's
|
Our 335mm kit with AP 6 pots is also on offer at £1200.
The largest discs you can fit under 18's is 363mm with the AP 6 pots. Cheers Ian |
how do thes compare to the newage brembo's?
|
Cheers Ian, Time to start putting some extra pannies away:thumb:
|
Originally Posted by DJ_Jon
(Post 8664719)
how do thes compare to the newage brembo's?
If your fitting these to your 99 car , the brembo's would probably need spacers as the dont fit under most 17" wheels , my kit have more offset on the bells to push the discs in further , so give more room in the spokes Cheers Ian |
Thanks for the swift reply Ian.
|
Originally Posted by Ian Godney
(Post 8664706)
Our 335mm kit with AP 6 pots is also on offer at £1200.
The largest discs you can fit under 18's is 363mm with the AP 6 pots. Cheers Ian Have decided to go for the AP 6 Pot. Will phone you tomorrow and place order. |
My number is 01656 723060 , speak to you tomorrow
Cheers Ian |
say if i wanted to compete in TA. using 6 pots up front, would the 4 pots be good enough for the rear and if so, how would i fit them.
cheers |
i have a set of AP 4 pots with Ian`s 330 ml discs, cant rate them highly enough
i paid eight hundred quid two years ago "second hand" for mine, this is a bloody good price ;) |
will these fit under rb5 17's ???
|
Originally Posted by need4speeduk
(Post 8666552)
say if i wanted to compete in TA. using 6 pots up front, would the 4 pots be good enough for the rear and if so, how would i fit them.
cheers No the 4 pots would be too powerful for the rears , you need calipers with smaller pistons to keep the ballance front to rear correct , I can supply you a rear 4 pot kit using a 325mm 2 piece disc , AP 4 pots with the correct size pistons , Ferodo pads and brackets for £950 Cheers ian |
Originally Posted by LUCKO
(Post 8666608)
will these fit under rb5 17's ???
Cheers Ian |
why do these offers always come at the wrong time. :cry:
dan |
Hi would these fit under a set of 18 bk on a classic my00
cheers |
Originally Posted by Ian Godney
(Post 8664857)
My number is 01656 723060 , speak to you tomorrow
Cheers Ian Cheque in tonights post as dicussed this morning. Andy :thumb: |
Originally Posted by RAPID STI
(Post 8667348)
Hi Ian
Cheque in tonights post as dicussed this morning. Andy :thumb: Cheers Ian |
Originally Posted by bobs_p1
(Post 8667024)
Hi would these fit under a set of 18 bk on a classic my00
cheers Cheers Ian |
I've just got hold of a 97 JDM STi and its only pushing out around 300bhp, but I do intend on going up to about 330bhp...
I'm after an AP brake upgrade and was wondering if the 6-pots would be an over kill? Is the recommendation to go for the 4-pots in my case rather than the 6-pots? (I also plan on putting 2-pots on the rear which I salvaged from my old 02 WRX... to balance out the braking) |
can you do this in a 330mm x 30mm disc please?
|
altho for the sake of another £300, the 6-pots do look ever so sexy! :D
Just say I did go for the 6-pots, would the 2-pots on the rear be enuf to balance them out? |
Originally Posted by Ian Godney
(Post 8666687)
Hi
No the 4 pots would be too powerful for the rears , you need calipers with smaller pistons to keep the ballance front to rear correct , I can supply you a rear 4 pot kit using a 325mm 2 piece disc , AP 4 pots with the correct size pistons , Ferodo pads and brackets for £950 Cheers ian i know you know your stuff but i just want to double check. The purpose of these will be to compete in either TA or the LMA eurosaloons. I'm aiming to get the car running at 700bhp so are you sure this will be enough stopping power? I will also need some 6 pots for the front so can you PM me with a best possible price for the rears knowing that i'll be back in contact in about a month to get the fronts too. Any suggestions on braking set would also be appreciated if you think of anything. Many thanks Matt R |
Ian, would the discs be your own brand or AP racing's ones?
|
Originally Posted by joey_turbo
(Post 8667511)
Ian, would the discs be your own brand or AP racing's ones?
Also is there an option for the AP calipers to be either the reds or blacks? |
Ian
Are these available in red and does the kit include braided hoses and fluid? Cheers Ben |
Originally Posted by alex_00s
(Post 8667518)
I reckon they are AP calipers and Goodspeed discs?
Cracking deal. |
All times are GMT +1. The time now is 03:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands