Fault Code P0031, Help Please
Does anyone know which sensor this relates to on my 2002 STI Prodrive, if so where is it located and where would be the best place to find a replacement? Taffyboy
|
I seen one of my mates playing around with his ecu today!
All the fault codes are on jollygreenmonsters website under the help section! JollyGreenMonster.co.uk I think 31 is Throttle position sensor, I could be wrong though! |
P0031 AFAIK is the OBD II code for a Faulty front 02 (lambda sensor).
This senses the oxygen in the exhaust gases and passes the info to the ECU to tell it what to do in terms of injecting fuel into the cylinders to get the correct fuel / air mixture when pootling about town (open loop). When you decide to give it a bit of hard right foot the ECU ignores the exhaust gasses and uses a look up table in the ECU to work out what fuel should go into the engine for maximum power while destroying the planet's ozone layer (closed loop) :D If you are not technically minded (like me) I'd look for the nearest scooby specialist for help :D Shaun |
lambda sensor
Thank you for that, do you know where abouts it is situated on the engine, any help/advice would be appreciated - Thank you, Taffyboy.
|
IT is the o2 sensor 4 wire one located in the header collector pipe between manifold and up-pipe located front right of car do not get a copy sensor as they don't work needs to be subaru one which are about £350 plus vat new , mine went just before christmas on my 2002 sti got mine second hand from a scrappy £100 guarenteed for a month , i had to remove the collector pipe , put it in a vice and then heat up with a blow torch to enable me to remove old sensor they are always very tight , i also removed the headers and ported these out whilst i had every thing off .
Mark |
Originally Posted by KLR16V
(Post 8656637)
IT is the o2 sensor 4 wire one located in the header collector pipe between manifold and up-pipe located front right of car do not get a copy sensor as they don't work needs to be subaru one which are about £350 plus vat new , mine went just before christmas on my 2002 sti got mine second hand from a scrappy £100 guarenteed for a month , i had to remove the collector pipe , put it in a vice and then heat up with a blow torch to enable me to remove old sensor they are always very tight , i also removed the headers and ported these out whilst i had every thing off .
Mark Mel |
Thanks very much for your help guys, does anyone by chance know the O/E part number!
|
Originally Posted by taffyboy
(Post 8656727)
Thanks very much for your help guys, does anyone by chance know the O/E part number!
cant remember. i just rung the main dealer and asked for it |
Part Number is 22641 AA042 apparantly
(see a very similar post about 10 below this one :D) Shaun |
even though youve already found the fault code i found this web recently whilst looking for a fault code of my own
A Complete List of all SUBARU OBD2 error codes [Archive] - MNSubaru.com list for all the fault codes |
Originally Posted by Midlife......
(Post 8657980)
Part Number is 22641 AA042 apparantly
(see a very similar post about 10 below this one :D) Shaun £60 delivered if your after a genuine 2nd hand one taffyboy :thumb: |
All times are GMT +1. The time now is 10:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands