ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Private For Sale - General (https://www.scoobynet.com/private-for-sale-general-17/)
-   -   v5/v6 engine 4 sale (https://www.scoobynet.com/private-for-sale-general-17/760064-v5-v6-engine-4-sale.html)

sy. 16 April 2009 03:11 PM

v5/v6 engine 4 sale
 
for sale the v5 engine from my00 uk wagon it has covered 113k but don't let that put you off most ones on flee bay claiming to be around 70k are more like 120k anyway!! it has a very comprehensive service record (dealer till 84k and the rest maintained by myself along with 3 cam belt changes & lots of receipts always run on 99 fuel & never run any mods without mapping all done by jgm it was running 330bhp 303lb/ft without any issues when removed only last week. removed only as replaced with a forged engine, serious enquires only, please note there is no inlet with this engine hence bargain £400 (it does come with a standard clutch and flywheel good for another few 1000 miles) collection from north b-ham
PIC NOW ADDED POST 9!!!!

kashe 16 April 2009 07:38 PM

is it a sti or a wrx engine or uk uk turbo 2000? is there any rattles or anything? as my pistons have just gone in my engine and dont want to replace it with one thats bought to do the same? thanks

sy. 16 April 2009 08:51 PM


Originally Posted by kashe (Post 8645217)
is it a sti or a wrx engine or uk uk turbo 2000? is there any rattles or anything? as my pistons have just gone in my engine and dont want to replace it with one thats bought to do the same? thanks

engine is from a my00 uk turbo no smoke or rattles if you look at the breaking wagon thread by martin (j555 hks user name) you will see i purchased his forged engine hence sale of this engine it was in daily use until 11/04/09 users on here that know me can vouch for this engine it has done a few miles but was running perfect

sy. 17 April 2009 08:29 PM

pm's replied & bttt

sy. 19 April 2009 07:48 AM

bump..

sy. 20 April 2009 07:33 AM

up

Mattybr5@MB Developments 20 April 2009 10:50 AM

up for top block and sweet engine

sy. 21 April 2009 04:43 PM


Originally Posted by mattybr5 (Post 8652275)
up for top block and sweet engine

cheers matty up she goes....

sy. 22 April 2009 12:24 PM

bump
may spit and sell block sep if interest in the v5 heads????
just to answer a few questions this engine had NO knocks/rattles or smoke when removed

sy. 23 April 2009 04:04 PM

bump...

sy. 24 April 2009 07:11 AM

up she goes.....

sy. 24 April 2009 06:47 PM

bttt

sy. 25 April 2009 07:06 AM

PRICE DROP!!!
WHOLE ENGINE NOW £400
(worth this just for a cheap fix/replacement for those suffering the dreaded bottom end knock and to fix on a budget)

sy. 26 April 2009 06:36 PM

bttt

t7srt 26 April 2009 07:36 PM

Where would it need to be picked up from mate?

sy. 27 April 2009 02:54 PM


Originally Posted by t7srt (Post 8665750)
Where would it need to be picked up from mate?

as per 1st quote north birmingham mate :thumb:

sy. 27 April 2009 09:39 PM

up

sy. 28 April 2009 04:43 PM

all pm's replied

sy. 29 April 2009 04:02 PM

bttt

sy. 01 May 2009 09:15 PM

bump

sy. 03 May 2009 08:21 AM

up

sy. 03 May 2009 09:17 PM

up

pitchblack 03 May 2009 10:33 PM

how much for the heads mate if you break it?

sy. 04 May 2009 09:11 AM


Originally Posted by pitchblack (Post 8681288)
how much for the heads mate if you break it?

if i break it...
heads £150
block/sump ect.. £300

pitchblack 04 May 2009 11:04 AM

I'll take the heads then mate, thats if you break it

sy. 04 May 2009 03:43 PM


Originally Posted by pitchblack (Post 8681803)
I'll take the heads then mate, thats if you break it

pm replied :thumb:

sy. 04 May 2009 09:42 PM

now sold

Dave M UK 04 May 2009 10:02 PM

Cheers sy,

Engine now sold to me which means along with my other engine which has a broken piston and more than likely a scored bore i have 2 of everything

The heads off this one or the heads off the dead engine will be for sale so if you want them pitchblack or anyone else wants them then they should be available in a few weeks if you can wait that long until i have my car back on the road

let me know

Dave M

pitchblack 05 May 2009 07:02 AM

Dave I'll be after the heads mate, and will be fine waiting a couple of wks mate, if you could pm me the details mate:)

Chris


All times are GMT +1. The time now is 08:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands