technical schema of STi speedo clocks
i'm looking for technical schema of STi MY98 white speedo clocks (w/o DCCD)
i'm changing my white Impreza GT clocks (after lift) to STi white after lift dials. and i hv a problem plugs are same but it think some pins in plugs are different, and i need to check which. now once i connect STi MY98 after lift speedo dials it is burning the fuse, and i think some pins in plugs are different can somebody tell me where i can find plugs schema to both speedo dials ? |
http://i726.photobucket.com/albums/w...al1997-199.jpg
download the workshop manual from the link in my mood tag |
tks slipstream ;)
|
ok i got wiring diagram, but i still hv no diagrams with differencies
if somebody put STi MY98 speedo clocks to WRX UK MY98 pls let me know which pins in connectors must be changed in order to hv STi clocks fully working, now it is burning the fuse :( |
any help ?
can somebody tell me which pins i need to switch once changing Impreza GT MY98 (after facelift) speedo clocks to STi MY98 white speedo clocks once i put STi clocks directly they are burning fuse |
bump
|
help somebody
above diagram shows only LHD Impreza GT clocks and i need also STi MY 98 RHD speedo clocks diagram |
I found the following info on RS25.com: Subaru Impreza GC8 & RS Forum & Community - Powered by vBulletin
I'll try to convert my black MY99 GL to white MY98 STi clocks, so probably next week I'll be able to confirm if it is correct. JDM V4 Harness: This is what the connector leads to on the gauge cluster A1> BlU/WHT high beam indicator A2> RED high beam indicator A3> YEL door open, interior lights A4> LTGRN ! symbol for parking brake A5> RED/WHT CEL (now in red) A6> BLK/WHT battery symbol/light A7> BLK/BLU seat belt symbol/light A8> GRN/WHT oil drip symbol/light A9> BLU/RED open door warning/light A10> WHT vehicle speed sensor 2 A11> GRN/BLK vehicle speed signal wire A12> BLK vehicle speed sensor 2 A13> VIO illumination B1> YEL/BLK clock B2> GRN/WHT temp gauge B3> BLK/RED temp gauge B4> BLK ground B5> ------- B6> BLK/GRN left turn indicator B7> GRN/RED airbag symbol/light B8> BLU/ORG open door warning indicator/light B9> LTGRN/BLK right turn indicator B10> GRN tach signal C1> ORG/WHT illumination C2> BRN/WHT fuel gauge C3> RED/BLK low fuel warning light C4> YEL/GRN hot "thing" warning light C5> LTGRN/YEL ABS indicator/light C6> BLU/YEL snow flake "HOLD" warning/indicator C7> PNK ??? C8> WHT/BLK small lightbulb housing, with no transparent indicator C9> YEL/RED I/C Spray indicator light C10> BRN/RED small lightbulb housing, with no transparent indicator C11> ------ small lightbulb housing, with no transparent indicator C12> WHT/GRN temp gauge C13> YEL/GRN clock |
I have done this same swap, STi4 clocks into a UK 98, I have the 2 pinouts somewhere at home, will dig them out for you.
Andrew... |
All times are GMT +1. The time now is 05:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands