Pro sport gauges (Beep)
I got these gauges fitted yesterday,by the mechanic i use and was wondering how to stop the beeping?I did a search and found a post on how to do it,but it doesn't seem to work.It says put key in ignition hold down button on gauge and turn key,but nothing changed for me.Any help on this would be great.
|
interested too,did not work forme either
jim |
Press the button down, turn the ignition on, wait for the dial to go black then release the button, repeat for each gauge :thumb:
|
Cheers Rbaz tried that again,nothing! Could it be the way they where wired?As in everytime i cut the ignition it resets the gauge back to the start?Cheers,Davy.
|
Originally Posted by rbaz
(Post 8492218)
Press the button down, turn the ignition on, wait for the dial to go black then release the button, repeat for each gauge :thumb:
try holding for longer or shorter but make sure your doing each one it can sound like its still doing it and its the one next to it |
Originally Posted by ISLANDMAGEEZER!
(Post 8492276)
Cheers Rbaz tried that again,nothing! Could it be the way they where wired?As in everytime i cut the ignition it resets the gauge back to the start?Cheers,Davy.
|
HI guys just wanted to know where i can get some of these gauges from ?
thanks .bob |
Originally Posted by rbaz
(Post 8492369)
Sounds like you have wired them wrong. Check the permanent live :thumb:
I have to reset my boost limiter each time also due to this. |
Originally Posted by BGH1R
(Post 8492506)
HI guys just wanted to know where i can get some of these gauges from ?
thanks .bob |
https://www.scoobynet.com/interior-1...ure-boost.html
Yes sounds like you have wired them wrong. You need a perm live for the gauges to be able to remember things like max boost and warning settings. Above shows how i wired mine. |
Originally Posted by BGH1R
(Post 8492506)
HI guys just wanted to know where i can get some of these gauges from ?
thanks .bob |
anybody know how to turn off the annoying beeping on defis??? its only from the oil pressure gauge when the ignition is on
wiley |
You have to hold for 5 secs after turning ignition on then let go on gauge you have fitted. I recently changed my battery and the beeping came back. If you done that then you must have them wired wrongly.
|
All times are GMT +1. The time now is 10:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands