oil pressure + temp
 

hi, im about to put some oil pressure and tempreture dials in, just need to know where to put the sensors, i took a quick look earlier and only saw a sensor in the top middle of the engine, but i have 2 sensors, is there another i have missed, cheers phil.

i used these
SUBARU ENGINE OIL TEMPERATURE GAUGE FITTING ADAPTOR on eBay, also, Subaru, Car Parts, Cars, Parts Vehicles (end time 29-Nov-08 16:53:00 GMT)
SUBARU REMOTE OIL PRESSURE GAUGE FITTING T-PIECE KIT on eBay, also, Subaru, Car Parts, Cars, Parts Vehicles (end time 29-Nov-08 16:53:28 GMT)

thanks very much, i was just being lazy, thanks again, phil.

just 1 more thing, what is the sensor for under the alternator?

oil pressure

so does the oil light use that sensor, and come on when the oil pressure is low?

yep more of a dead engine light than low oil pressure

sorry to e a div on this but can i use that sensor under the alternator for the oil temp and the new adapter on the top of the engine (cylinder 3 bung) for oil pressure, thanks phil.

anyone?

.....

yes?

I've just fitted an oil temp in the 3rd cylinder position, i understand it's the hottest cylinder, so the best place to take the temp form.
The pressure positon is above the oil pump for a good pump pressure reading.

Mit

Hi mate I have complete oil temp/oil pressure fitting kit for sale purchased from scoobyparts for £31, only used the temp bung but my sensor did not fit into the bung so it was removed. £20 inc post

Banny

thanks very much, ill take a look at near the oil pump for the pressure sensor location, tommorrow, thanks again, phil.

thanks banny but i have already got the bung for cylinder 3, cheers phil.

The 3rd cylinder port's a pain to get to, be warned!

Banny, does that include the lma extension lead for the pressure? If so, thats a good price!

Yes it does it is this kit here:

Scoobyparts Ltd OIL PRESSURE & OIL TEMPERATURE GAUGE FITTING KIT

Banny

ive had a look and mine is quite bare, so shouldnt be too bad, but thanks for the heads up.