new age sti lump into a classic??
how hard would this be and is there any1 out there who could do this??:wonder:
|
unless you use an after market ecu with custom loom you are looking at the engine, loom and ecu. dash loom and speedo / rev counter.. it might then need linking into other looms which plugs will be different.
Simon |
wow sounds more than its worth, cheers
|
Ive had this done and and like JGM said you will need ECU & custom wiring loom, i had an autronics ecu already in my classic but had to be swapped for the autronics sm4 version & it took kev at scoobyclinic about 2 days to do a custom loom :brickwall my engine is the sti8 typeUK with the forged internals as standard running 420bhp :norty: it wont be cheap, SM4 fitted & mapped £1500, custom loom :wonder: labour costs £35 per hour = £££££ however long it takes :thumb:
KIDS DO NOT TRY THIS AT HOME :nono: |
420bhp as standard! Is that a typo?
|
standard sti internals can run to late 400s
|
sti v8 motor n underchassis mount straight everything into the classic GC8 body. even the radiator is straight bolt on just minor bracketing. m currently using fibreglass to also mount the guages cluster of the v8 into a v3 dashboard. will post pic soon once all is finish with the conversion
|
Originally Posted by IRC450STI
(Post 8439064)
Ive had this done and and like JGM said you will need ECU & custom wiring loom, i had an autronics ecu already in my classic but had to be swapped for the autronics sm4 version & it took kev at scoobyclinic about 2 days to do a custom loom :brickwall my engine is the sti8 typeUK with the forged internals as standard running 420bhp :norty: it wont be cheap, SM4 fitted & mapped £1500, custom loom :wonder: labour costs £35 per hour = £££££ however long it takes :thumb:
KIDS DO NOT TRY THIS AT HOME :nono: |
how much is loads? (ball park figure) you can get an sc450 for around 12k which is all ready to go.
|
All times are GMT +1. The time now is 01:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands