ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)

- General Technical (https://www.scoobynet.com/general-technical-10/)

- - What head gasket????? (https://www.scoobynet.com/general-technical-10/739715-what-head-gasket.html)

rapid.STI

19 January 2009 05:46 PM

What head gasket?????

right guys got the crank bk today:luxhello: :luxhello:
so what head gasket are you running? been looking at some on ebay? not sure wether i should get fibre or stainless? the 1s i took off are 1.5mm, but for that size in cosworth gaskets it£109:cry: .
what you reckon????

Tucker82

19 January 2009 05:52 PM

I used the standard 1.6mm Fibre gaskets from ebay and they are fine. All depends on what power your running/going to run.

rapid.STI

19 January 2009 06:00 PM

its running 320-340hp

merlin24

19 January 2009 06:21 PM

Dont use the Composite/fibre gaskets if you can help it - go for a Multi Layer Steel (MLS) head gasket - the Subaru STi 3 ~ 4 thick MLS will be fine for the power(and more) your running.

Mick

All times are GMT +1. The time now is 04:11 AM.