ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)

- General Technical (https://www.scoobynet.com/general-technical-10/)

- - oil preasure (https://www.scoobynet.com/general-technical-10/734407-oil-preasure.html)

burnhamshaun

28 December 2008 04:20 PM

oil preasure

ive recently done an oil change on my scoob 93 classic and put a highly recomended 0 50 in but now after driving for a bit and the oil gets to the desired temp the pressure is about 1 bar where as before it was about 2-3 bar any help

Slowboy Racing

28 December 2008 07:04 PM

0/50 is thin for a 93 car, 10/40 or 10/50 is a better option. Oil weight will affect pressure readings.

burnhamshaun

28 December 2008 07:21 PM

this is what scooby world recommended :confused: :confused:

overlord

28 December 2008 07:28 PM

is 15/50 ok in a 1993 scoob?

Glowplug

28 December 2008 07:58 PM

A good quality 10w40 semi synthetic is more than good enough for a early classic with little mods, i dont believe there are any benifits from using fully synthetic on such an old engine :thumb:

All times are GMT +1. The time now is 02:57 PM.