Club Pro 620bhp Time Attack Impreza - '99 STI5 RA Ltd
’99 Impreza Race/ Time Attack Car – 620bhp
https://img.photobucket.com/albums/v...andsHatch1.jpg If I can get the right money then I will sell my Time Attack Impreza as I really need to concentrate on the business next year without TA distractions. I have competed for the last 3 years and the car is a front runner in the Club Challenge class, indeed for 2009 it has been promoted to the Club Pro class as I finished within 5% of the class winning time at 4 of 5 circuits I competed in - indeed the one I didn't was a wet day at Donno - which doesn't count. The spec af the car is as follows: - 2.35l race engine built by Len Carlyon with the spec as detailed PPG 1-5 straight cut dog engagement gearbox - in 99 STI casing DCCD centre diff with straight cut drop gears exe-tc rs07 coilovers with adjustable top mounts AP 5555 4 pot 330mm rear brakes AP 5555 4 pot 330mm front brakes Swirl pot, twin external bosch 044 fuel pumps and filters, fuel lines & paralle fuel rails Lateral performance stainless FMIC/Rad combo LP modified 1000cc injectors (flow matched) Simtek ECU for 99/00 Impreza 99 Impreza RA shell with full weld in T45 custom cages roll cage, seam welded Cusco plated LSD rear diff - 3.9:1 ratio and R180 Tilton 600 series pedal box with master cylinders and brake lines 2 x Corbeau XL bucket seats 2 x Schroth 5-way harnesses FIA approved Exedy triple plate carbon clutch Momo Race steering wheel with quick release coupling AVCR in blue Wideband AFR with LC-01 display 4 x low mileage driveshafts 100mm K&N filter & samco inlet Spares/ parts not fitted new set 235/40/18 R888 tyres Scooby wheels with 215/45/17 T1R tyres CTG carbon fibre propshaft for 5 speed (BNIB unused) Turbo Dynamics GT4088R turbo (700bhp+ capable) 1 x 42mm TIAL ext wastegate AP 5555 6 pot 356mm front brake calipers LP modified 740cc Nismo injectors (flow matched Reverse inlet manifold Rear whitline adjustable lateral links APS 3.5" internal diameter turbo back exhaust Twin scroll baffled sump Twin scroll tubular manifold Race Engine built by Len Carlyon, spec (reliably run 620bhp and 2.2 bar):- EJ22T closed deck block with under piston oil squirters STI heads,gas flowed, ported and polished Arrow billet steel crank with 79mm stroke Kent Lateral Performance spec camshafts ACL race bearings Supertech one piece inlet valves Lateral Performance baffled sumpSupertech inconel exhaust valves Wiseco pistons Supertech valve springs Crower Rods Titanium Performance retainers Uprated 1.6mm steel head gasketsPorted and polished heads ARP uprated head studs Full set of Shimless buckets Phase 2 inlet manifold with insulating spacers CDF Racing alloy vernier cam pulleys The total cost to build this car has been circa £50k over the last few years including the car. It is road legal and is taxed and MOT'd, although it is not ideal for road driving as it is set-up for the track. The car has been built and maintained by Len at Subaru 4 You in Newbury and mapped by Simon Roe (Jolly Green Monster). Majority of tuner parts have been sourced through Mark Aigin (Lateral Performance). Looking for £18k for the car and happy to discuss offers on the parts - realistic pricing in the current times. https://img.photobucket.com/albums/v...Newscooby2.jpg And how about being immortalised forever in Forza 2... :) https://img.photobucket.com/albums/v...forzaimage.jpg |
Shame to see you sell after all the work you've put into it Terry and if it were me and i had the cash, you get every last penny of your asking price.
Top motor. :thumb: |
How much for the lateral links please :)
|
Price on the twin scroll baffled sump please Terry.
Banny |
PMs sent :)
|
Price on the carbon Propshaft & Whiteline Lateral Links please!!!
|
front aps price for me mate please
thanks gaz |
PMs sent :)
|
pm sent :)
|
PM's replied to :D
|
Price for 888's and location please.
|
pm sent
cheers mickyboy |
i think i might of mis read your post about parts, if so please ignore.
cheers mickyboy :) |
All PMs replied to :)
|
Hi, also interested in the carbon prop, PM me a guide price if you could?
Thanks,Mit |
LMA project feedback
hi tony,
nice car mate. very nice. i'm sure what your saying is right about the cost thing. if only i had 18k right now. can you PM me to give a price you'd except if your willing to go any lower. if not and as i've seen a few people after various parts, would you be kind enough to give me some quotes seperately on the entire engine, suspension set up, brake set ups, complete gear box. many thanks and once again, great car |
PM sent :)
Mit - you need to make some space in your inbox mate :) |
Wish it was my car ;) Terry has done a great job with this one :D though my Type R will keep me going for some time :D (already thinking of those mods, brakes, brakes, brakes....)
Tony:) |
hi
can you pm me price for front bumper,spoiler and splittter please. chris |
engine
pm me a price for ur ej22t block heads cams etc mate sounds perfect for what im looking for.:thumb:
|
Update for you all. I'm not looking to break the car if possible and currently have a couple of interested parties interested in the whole car. I will be exploring these avenues completely before considering breaking the car.
The best thing is to drop me a PM if you're interested in any items, that way I can respond to you and won't miss any interest. Cheers and hope you all have a great New Year :) Terry |
Sorry! Cleared some out now!
|
BTTT for the New Year :)
|
would i of seen this at the Time attack at Knockhill earlier this year mate
|
BTTT - still for sale :)
|
price for injectors if there fine for v6
jim |
All times are GMT +1. The time now is 05:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands