Alloy Wheel Powdercoating @ £1 An Inch! - FAO West Yorkshire Lads!!
 

Only suitable section i could find to post this, so here goes!

Had my old clio wheels done by them!

400 colours available, for £1 an inch! So 4 16" wheels was £64.

the more harder colours such as chrome etc. are £1.50 inch

CAS Coatings, Old Mill, Victoria Road, Eccleshill, Bradford BD2 2BH, about 10 mins from Leeds Bradford Airport, little door on a sidestreet! Phone number 01274 634493

Thoroughly recommended!

examples of work

Attachment 62196

yep top place this few guys i no have had wheels done here

just another bump for this place had my sti wheels powder coated gloss black done in a day and a half to a perfect standard.couldnt believe the price was correct £68 for a set of 4 17s.highly reccomended!!

friends used these guys again, turning his black wheels white..

awesome job! try and get some piccies

would love to uses these but such a mission from me!!!

Do they remove the tyres and shot blast the wheels, or do you have to prep them yourselves?
If they done a postal service, they'd make an absolute killing, with most places charging at least 40 quid a wheel!

Don't do it !

I know two people who have had wheel failures after powder coating !

PM for details.....

P.S. LSN Coatings did a set of four 17" STI alloys for me for £100. Google is your friend.

wheel failures? never heard of that

and you have to take tyres off and give them just the alloy

Thats cheap, I got quoted £150 today for mine in Cardiff.

What do you mean wheel failure!?! Over baking the metal and cracking it I guess?

Had mine done, looked ok, but first time airborne:norty: wheels started wobbling. On inspection found cracks propagating on spokes, (sti 8 gold wheels). All four of them.
Suppose if you drive like a "girl" you might be ok.
I'd been airborne many times before coating and never had any problems with same wheels.
A mate had same prob, too much of a coincidence for me.

Hi Frosty !

I wondered if you'd spot this one.

Skywalker may be along soon ?

dunx

P.S. Mine are fine ! Cheers to LSN Coatings.

maybe it was the 'previous times' which started the cracking which was exacerbated by the powdercoating??

No, don't think so, it was like they went out of balance in one go not gradual.
I would defo say it was due to powder coating in some way. Also my mates did the same immediatley after coating. Maybe some companies do it in different ways.

Hiya Dunx, you don't get high enough to test them :hjtwofing