Perrin 3 Port Boost Solenoid - Back by Popular Demand!
 

Hey Everyone,

We've got the 3 Port Boost Solenoid back in stock!

Fits majority of cars! Drop me a PM if your unsure
http://www.perrinperformance.com/sha.../862_large.jpg
RRP: £74.95+VAT (£88.07)
Delivery Normally £6.95
Now as Christmas is looming I've managed to sort 5 out especially for ScoobyNet at £69.95+VAT with FREE DELIVERY!
For £5 i'll post worldwide!
1.
2.
3.
4.
5.

hmmm. could be very tempted by this. Does anyone have a simple fitting guide and some pictures of it fitted to a bugeye and also do you need a ecu reflash after fitting? (Already gat an AF remap)

Thanks!
S!

Ideally you would need an ecu reflash.

Here is a link to the fitting instructions:
http://www.perrinperformance.com/sha.../asmint720.pdf

You have a PM :)

does the free delivery carry for overseas???:norty: :norty:
or is there another deal???
if i dont ask i 'll never know:lol1: :lol1:

Hi sorry to look really stupid but what are the benefits of fitting this product how do they work etc.

i brought one of these off u 4 months ago and mine didnt come with the plug is this somethin they have recently changed as i had to cut mine and join the wires

iv seen a great gain in power and torque from a rolling road befor then a remap after and the car drives better too

Hey Mikey,
The free postage doesn't carry overseas. However i'll post this item anywhere in the world for £5 (and we'll pay the rest!)
Lins:D

Factory boost control management relies solely on a flimsy, inefficient actuator. When boost levels are increased over stock, by the use of aftermarket ECU’s, these factory actuators fail to properly meter boost. The resulting spikes, dips and erratic response can not only damage your engine but certainly spoil the performance gains. Enter the PERRIN EBCS!
Constructed from billet aluminum and fiberglass reinforced composites the EBCS, is a true solenoid. It is rated to hold boost pressures in excess of 100 psi and thus far more than any gasoline turbocharged engine will ever see. This product is especially helpful for tuners that have otherwise not been able to utilize boost functions found in many aftermarket reflashes and ECU’s. Avoids the cost and additional tuning of standalone electronic boost controllers.

i'll take one when the GB is done!!!

No problem Mikey.

1.Mikey30
2.
3.
4.
5.

4 to go!

forgive me for being stoopid but i think i have read somewhere that some of the later models have these fitted as standard?? is this true???. i have a 2002 STI bugeye with a few simple mods, de cat, k+n induction. and planning taking it for an ECUTEK remap. WOULD the 3 port boost solenoid benefit me??????? any help would be apprieciated.thanks

The bcs on the newage is a 2 port. This would be an upgrade but needs mapping for as it would overboost if straight swapped.

If I was going to fit one of these to my Type R with a power FC ecu and AVCR would it work or does the AVCR come with one???

Regards

chris

Hey,
The WR1 has one as standard.
It would benefit you greatly as a 3 port makes it easier to get a nice boost curve when mapping.
Lins:D

Hey Chris,
The AVCR already comes with one.
Lins:D

1.Mikey30
2.scooby-matt
3.
4.
5.

many thanks TSL

so does this mean that i should wait on fitting till i was at the remap place???
or can i fit it and drive until i get a remap with out problems???

Bought one lately but when i put it on the car to test it, it just clicks like crazy! Is this normal? or just due to the fact i need to have it remapped?

Hey,
Fitting one without a remap can't guarantee a stable boost level. It would be best to fit when you go to get your car remapped.
Lins:D

Hey Andy,
You would need a remap so you get a stable boost level.
Lins:D

come on guys!!!!
few more names needed!!!

Yeah but should it click like crazy when the engine is running?

1.Mikey30
2.scooby-matt
3.MattDoyle
4.
5.

fair play matt!!!
:thumb: :thumb:

Hey Andy,
They do click when they operate. Just check it's been installed correctly. If it has, then it's perfectly normal and I wouldn't worry about it.
Lins:D

i could do with this but am saving for a simtec

would i need one with a simtec ecu ?

Hey,
Yes you would definately benefit with the Perrin 3 Port than a standard one with a Simtec Ecu.
Lins:D