350 bhp from bugeye sti non ppp
 

hi
can you tell me how i can achieve this amount off power from standard or close to that amount.all input welcomed.
cheers

decat and a remap should take you as near as makes no difference very cheaply. if you change the turbo,injectors, fuel pump,and fit a fmic you could see 450 bhp dependant on turbo. option 1= £800 ish option 2= £2000 ish
:norty:

extra £800 for that much BHP is sweet! id go for that and then save for big big engine mods!

£800 is pushing it really.

Full decat = £300 [2nd hand]
Walbro 255 fuel pump = £70
Free flow panel filter = £40
Ecutek remap £550 atleast
Tank of fuel :D = £50

Not much change from £1000.00 but worth it imo.

I got 340bhp with this set up.

tsl 353 package i think £3000 tell me if wrong

thanx for the input guys.any recommend tuners.i am in the middlesex area.
i do know of power enginneeering.but would like to try someone different.
dont mind travelling.
cheers

HKS panel filter is £35 delivered from sumo power
£500 notes for the ecutek rmap on a classic at alan jeffs at the moment,( dont quote me on that)
scout around for other bits
i just got a decat centre section for my classic for £25 and its never been on a car, also got a janspeed stainless steel backbox for £62 delivered
so if you scour ebay then modding can be done on a budget!

I have a tsl 333bhp/330 Ibs. The sti dont need bigger injectors unless your looking for over 380/400bhp. 3ins de-cat or even a sports cat,up/pipe, walbro f/pump,re-map.You may have a vf35 turbo on your car at the mo. It will make 350bhp at a push with the right suporting mods. Otherwise Td0518g,TD0520g, Are good budget turbo's and more than able. Good luck

I have similar as above but with a TD05 18g and am running 350bhp at 1.5 bar.