foglights and sidelight prob
Hello all,
got a problem when i turn my fog lamps on the side lights come aswel bit of a problem as it wont go through the mot like this:freak3: anyone have any ideas about where to start looking to see if someone has wired it like that. Cheers Rich |
Front fogs, or rear, or both?
AFAIK, the FOGS should be wired so that THEY won't come on without sidelights? Maybe activating fogs, therefore, HAS to activate sides? Alcazar |
front fogs im on about,
doesnt have a rear fog thats the prob, so im wondering how it got through the last MOT, have pulled the dash apart and the fog switch seems to be wired ok, anybody else any ideas where to look? |
Even so, that is the correct procedure. You cannot have your front or rear fogs on without sidelights. An MOT tester should know this.
|
FRONT fogs aren't tested on the MoT AFAIK, since they are not mandatory.
So long as your side lights don't immediately bring them on, you're OK. If they do, just remove the fuse/bulbs/wiring connectors to the fogs. Alcazar |
Originally Posted by joey_turbo
(Post 8107029)
Even so, that is the correct procedure. You cannot have your front or rear fogs on without sidelights. An MOT tester should know this.
Originally Posted by alcazar
(Post 8107278)
FRONT fogs aren't tested on the MoT AFAIK, since they are not mandatory.
So long as your side lights don't immediately bring them on, you're OK. If they do, just remove the fuse/bulbs/wiring connectors to the fogs. Alcazar the sidelights come on when i turn the fogs on, which is correct i believe, MOT tester said he thought there was a wiring problem thats what got me looking. cheers for the help p.s anybody know how i should rewire the reversing light to become a fog? |
Originally Posted by Rich_wrex
(Post 8107721)
i see now so everything is correct then all i need to do is put a red bulb in the reverse light position and wire it up and im away.
Strange they tested my front ones, the sidelights come on when i turn the fogs on, which is correct i believe, MOT tester said he thought there was a wiring problem thats what got me looking. cheers for the help p.s anybody know how i should rewire the reversing light to become a fog? |
Originally Posted by psigeek
(Post 8107846)
What part of the country are you in mate? I have had EXACTLY the same prob as you only 4 months ago. I got someone to wire a reverse light into a fog in the end. Cost me £30. If you're in Kent or nearby I can point you in the right direction. Oh and I had to have a dedicated, rear fog only, switch to make it work.
|
Originally Posted by Rich_wrex
(Post 8107881)
cheers for the help mate but im up north near manchester, i'll have to try and find another fog switch from the for sale section or something and then get it wired up somehow.
|
Originally Posted by Rich_wrex
(Post 8106951)
doesnt have a rear fog thats the prob, so im wondering how it got through the last MOT,
|
On my new age, the front fogs won't come on without the sidelights being activated.
The rear fog won't come on without dipped headlamps being activated. Whether this is required for the vehicle to be legal I don't know - just thought it might help. |
Managed to source a rear fog switch but im having trouble finding a uk rear light cluster anybody know where i might be able to get one from.
|
Try GradeA at Hayfield in the High Peak.
Alcazar |
Originally Posted by Rich_wrex
(Post 8108706)
Managed to source a rear fog switch but im having trouble finding a uk rear light cluster anybody know where i might be able to get one from.
|
Cheers for all your help everbody:thumb: ,
Managaed to source a uk rear foglight switch and a uk rear cluster with an internal foglight, just wondering if anybody knows will my car have the wiring already there to install them as is or will i have to salvage part of a wiring harnes from somewhere or what:confused: thankyou rich |
btt
|
Originally Posted by Rich_wrex
(Post 8123530)
Cheers for all your help everbody:thumb: ,
Managaed to source a uk rear foglight switch and a uk rear cluster with an internal foglight, just wondering if anybody knows will my car have the wiring already there to install them as is or will i have to salvage part of a wiring harnes from somewhere or what:confused: thankyou rich If the wiring isn't there for whatever reason it is not a huge job. You'll just need to run a wire (small thickness) from the switch to the back and solder it on. You can use one of the many grounding points in the back. The only time I can think that you'll need a wiring harness is if you need it to come on with the rear lights. There are plenty of auto electricians to do the job. |
All times are GMT +1. The time now is 02:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands