How much for input shaft oil seal?
 

I know the seal itself is cheap but what am I looking at paying for someone else to do the job? I'm certain it's the input shaft seal as I could smell gearbox oil burning. Clutch feels fine so I'm hoping that's going to be ok?

TIA.

Do you mean the output shaft?? gearbox to prop?

Just done mines a few days ago, very easy job.
Seal is around £9 from subaru, job takes around 30 min-1 hour
I found that not only had the seal gone but the prop was also slightly worn and is still slightly leaking.

have a look underneath to see where the oil is dripping from.

If its the input shaft seal its guna be box off and possibly a new clutch plate due to oil contamination....Gearbox removal and re-fit is about £300...